![]() |
Would I be ok to wire a much more high speed fan to the connector for the existing fan? My lrp fan has given up the ghost.
|
Hey guys,
I am wanting to know whats the lowest turn motor you can use with the standard flow with 3.7v? it doesnt state anything on website Cheers Kevin |
Originally Posted by JustWill75
(Post 12073163)
Do anyone have this thing working with windows 8 yet? I'm still running the the out the box settings in 17.5 TC with a Reedy Sonic mach 2.
|
Pulsing
Hi, can someone tell me what could cause pulsing or pulsating? Also the radio sync seems to drift quite a bit. For example after I sync initially I get steady throttle and then after a while it drifts where I don't. Goes full throttle and cuts back back on back off etc. At all throttle settings it drifts.
I have a spectrum 3s radio with a 3520 dsm2 receiver. |
The search function is not letting me look for "1s". Has there been any mention of a 1S version for 1/12 or WGT?
|
Originally Posted by Mike Haynes
(Post 12084095)
Yes i have for the past month with no issue so far, you have to disable the driver signature enforcement requirement in windows, then install the lrp link and driver.
Do you have any tips for a good starting point for a Flow Works pushing a Reedy Sonic M2 17.5 Blinky on a short track 100x50? Gering and Timing would be cool to bro. You know of course when you got time. |
Originally Posted by JustWill75
(Post 12086269)
Thanks Mike.....
Do you have any tips for a good starting point for a Flow Works pushing a Reedy Sonic M2 17.5 Blinky on a short track 100x50? Gering and Timing would be cool to bro. You know of course when you got time. |
I have the lrp flow works team and mode two brake ramp and brake type in version 3.3 I don't understand what that does? can somebody explain it?
|
Originally Posted by Mi4cxl
(Post 12080549)
Would I be ok to wire a much more high speed fan to the connector for the existing fan? My lrp fan has given up the ghost.
or what fan can I use as a replacement? |
My fan recently died as well. :( Luckily I'm too scared to ever try modified again, so I won't need it.
|
Originally Posted by syndr0me
(Post 12120764)
My fan recently died as well. :( Luckily I'm too scared to ever try modified again, so I won't need it.
|
Flow with new LRP X20 13.5T motor
Has any one used it with the new LRP X20 13.5T motor ?
|
I have a lrp esc flow and want to buy a 4.5t engine which is working the
best the thunder power or the speed passion motor or is it better to use a lrp x20 4.5t |
This past weekend, I had one of the wires on the power switch break, right at the soldering point on the switch. The wire is really thin and so vibration must have broken it. Something to watch out for.
|
Originally Posted by peter.
(Post 12125324)
I have a lrp esc flow and want to buy a 4.5t engine which is working the
best the thunder power or the speed passion motor or is it better to use a lrp x20 4.5t |
| All times are GMT -7. It is currently 09:01 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.