you have to keep pushing the button on the transmitter for a while... if i remember well it was more than 20-30sec..

I've tried holding the button and pressing the button for about 1 min or so but still didn't bind. It binded with my friend's module but mine didn't. i tried binding my two sr3000 to my module (not the pro) and it binded without any problem. Is there a possibility that my module won't bind any sr3500 micro rx?

Normally it works.. but it is better if you talk to them directly..
http://www.spektrumrc.com/About/Contact.aspx

i was able to bind it already thanks for the help:)

how you bind it?

re
 

i didn't notice that i plug the servo wires on the other side. (black wire should be in the outer part of the rx)
are you having problems binding your spektruM?

never mind i got it..thanx

Bought a Spektrum Pro set for my M11 lately and having serious problems with it. It will shutdown, glitch, responding very slowly or not at all. First I thought it was the receiver so I swapped in the older receiver I knew was working. That didnt work and it was just like with the newer receiver. After that I changed the module on my M11 to the older one and it worked perfect. Also the older module worked just fine with the newer receiver. Does anyone know whats up with that thing? I did not have a cap since the og version worked fine without.. Oh yeah I have LRP Sphere Comp and Futaba 9451.

What batteries are you running? Make sure that the ESC is set to the correct battery mode.

Spektrum warranty service is nothing but top notch! I just got 2 pre-broke receivers back, one PRO who was just 2 weeks old when it started to glitch and a standard one with torn antenna.
Got the package back and found a paper i thought was a invoice since i bought the recievers in HK and hadn't got any receipts, i was so wrong.. :D They had replaced the PRO-series reciever free of charge with a brand new one and upgraded the old regular reciever with new software and new case. They even paid for the Express shipping back to Sweden.

Thanks to Spektrum!

Hey guys, I just got my Pro series and the micro receiver. After I bind the system and take the plug out, can I use that slot for a fan, or something else? or do I have to leave the slot empty. Cause I have my trans connected in the first slot then the esc and servo.

thanks,
Chris

As far as I know, the binding slot is only for that purpose only and cannot be used for any auxillary functions (ie. fans, power capacitor, etc.)

I'm sure GaryK from Spektrum will correct me if I am wrong.

Leonard.

re
 

as far as i know you can use the plug for your fan... if you'll look at your bind plug it's like a "jumper" sort of thing...

Thanks guys, I have my fan soldered to the on and off switch and everything else, I just want to know if I can plug the fan into the slot. I want to do this cause it looks messy the way it is. lol ;)

thanks
Chris

I have my fan plugged into the bind slot on my 3500 micro receiver and it works fine. the fan still comes on when the esc is turned on. :nod: