Originally Posted by Carranza76 (Post 10966933)

I have a Speed Passion LPF ESC with an orion Vortex 17.5 motor a Spektrum 6010 servo and a SR300 RX and DX2S TX.

When I go to give power I loose steering I added a capicitor to the RX and it worked for about 4 runs and it did it again last night in my A main club race that I was running third in and was ready to catch and pass second. Any ideas what would be causing this?

Originally Posted by Big Lee (Post 10968591)

just a quick question, how do you get the 15 modes instead of the 10 that comes standard in the GT2.0, do you need the lcd cotroller insted of the led one that it comes with to enable you to be able to download a different software to enable the 15 modes. Is it worth it, what are they. Also I run a 6.5 V3 in a b44.1, mod 4wd buggy class, is it to much to have the timing on the max advance, 26.5 deg, I had some cogging issues and I put the timing back to 0 and played with the sensor wire, I think it was pulled out ever so slightly, and the cogging went away. So I don't know if it was the timing or the sensor cable that fixed it.

Originally Posted by russp (Post 10967669)

Spektrum sr300 equals ummmm junk, u should know better Chrissy poo!

Originally Posted by Carranza76 (Post 10969306)

When you hook me up a a radiopost I will switch!

But the problem is I never had a problem till I switched to Speed Passion!

I love the ESC but cant afford $400 buck plus for new TX and RX's.

So let me know about the hook up. :sneaky:

Do you think the SR3300T make a difference? I have one of those.

Originally Posted by russp (Post 10969416)

Radiopost got some good deals right now, but I do think its that particular reciever cuz the 6010 isn't a power hog by any means and I've never had issues with sp stuff even when I ran airtronics stuff

Originally Posted by xrayrc (Post 10925909)

Been running gt2.0 pro in my 4wd sc trinity 4800 4pole. and it's super smooth.
I left it in the stock no timing mode just calibrated.*
And it's been working great till today. I tq'd 4wd shortcourse and went out for my main and did 1 lap and it shut down. Changed out lipos none will work and I dnf'ed. Motor has been running fine 160ish temps esc 110 or so fan intact and running always.

All the esc will do is flash a red light no throttle input tried 2 receivers as well.*
Sometimes I will get power to motor but will run random even without input from transmitter.

Any ideas on what I can do?
Do you repair them?

Bought from us how can I get an rma?

Originally Posted by Raul Garcia (Post 10926091)

Howard, when do you expect the "Blaze" 550 motors, also the website shows them paired with Reventon "R" esc's. Is this accurate, for 4wd, and not the "Pro"

Originally Posted by Cain (Post 10946622)

is this the last box they made that had the squishy buttons? I remember when they switched boxes from the HW style one to a newer one but the main complaint was the feel of the buttons.

Can your old programmer boxes be used on the Revention?

Originally Posted by nolo148 (Post 10966720)

Hi is the Speed Passion MMM 17.5r motor good? Does it overheat? I will be running it in 17.5 blinky.

Originally Posted by Carranza76 (Post 10969526)

Thanks as always russy poo, I will switch it out.

Where you racing this weekend? if Peg is watered out you going somewhere else?