R/C Tech Forums - Speed Passion Thread

Page 51 of 385

« First

101

151

Last »

Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - Speed Passion Thread (https://www.rctech.net/forum/radio-electronics/490076-speed-passion-thread.html)

kwiksi

11-01-2011 05:32 AM

Quote:

Originally Posted by NitroLuver (Post 9849089)

I am still having an issue with this speedo..I re-programmed, and re-geared my 17.5 and it still was very slow...what do you guys think is the problem?

What motor are you using? Can you advance the physical timing?

NitroLuver

11-01-2011 10:22 AM

Quote:

Originally Posted by kwiksi (Post 9854411)

What motor are you using? Can you advance the physical timing?

used a murfdogg 17.5 I can advance the motor timing but it should'nt be as slow as it is

ok I would like to get the box if I could find one...you know a place that has them in stock?

Solara

11-01-2011 10:55 AM

Quote:

Originally Posted by Mxer59 (Post 9852524)

Thanks just was curious as I can't get the gt 2.0 pro anywhere. And I've heard shortage is due to a new model being released. I want to run sp just can't find them anywhere and I've been told silver arrow 2.0 won't work on 2s either

Give us couple weeks, I was told there is shipment coming next week, some GT2 PRO and LPF.

mjk1210

11-01-2011 10:57 AM

Quote:

Originally Posted by NitroLuver (Post 9855371)

used a murfdogg 17.5 I can advance the motor timing but it should'nt be as slow as it is

ok I would like to get the box if I could find one...you know a place that has them in stock?

Pretty sure I saw one on the A-Main website just the other day.

Mxer59

11-01-2011 11:17 AM

Quote:

Originally Posted by Solara (Post 9855485)

Give us couple weeks, I was told there is shipment coming next week, some GT2 PRO and LPF.

Thanks for the info I'll defiantly be buying a pro I don't have a Esc right now as I sold them off for the gt2 pro

NitroLuver

11-01-2011 12:02 PM

Quote:

Originally Posted by mjk1210 (Post 9855494)

Pretty sure I saw one on the A-Main website just the other day.

Getting the box...from a-main hopefully I can get my truck running good once it gets here but until then I'll have to throw another system on

sc10pc

11-02-2011 02:33 PM

Hey, has any of you guys heard about the new ananta 2sc kit from speed passion?

bzb	11-03-2011 12:31 AM

several times on this tread :ha: :D

i'll get one!

Solara

11-03-2011 12:03 PM

Quote:

Originally Posted by sc10pc (Post 9860613)

Hey, has any of you guys heard about the new ananta 2sc kit from speed passion?

Should be out on X'mas time....I am working out the number of PARTS that I need to order to fullfill the US dealer...we will go start a pre-order special. Stay tuned...

cm.stites

11-03-2011 12:30 PM

are any of yall using the speed passion chargers? if so which ones i would like something that can do atleast 10 amp charge rate.

Kuhnibärt

11-03-2011 01:51 PM

Hi all,

i start racing a Asso 44.1.

ESC: SP GT2.0 LPF
Motor: Gens Ace mars 6.5T

Gearing 81/20 (?)

Can anyone give me a recommendation for ESC Settings
for the advanced programs (12 - 15) ?

Track will be indoor - carpet

Thanks in Advance

t0p_sh0tta

11-03-2011 02:02 PM

Any ETA for the 2.0 Pro or LPF to be back in stock?

mjk1210

11-04-2011 02:34 AM

Quote:

Originally Posted by Kuhnibärt (Post 9864969)

Check the setup sheets on the website. I would put the last one around 500 with a 6.5 though. Check temps and if for some reason it's getting hot (over 150) go to 600. I wouldn't expect you'll reach full throttle very much on a carpet track (they are usually not very big) especially with a 6.5 motor

Kuhnibärt

11-04-2011 03:00 AM

Many thanks for your advise.

Alternatively i can try a Reedy Sonic 9.5T.

i will try the 6.5T first.

regardz

NitroLuver

11-05-2011 12:23 AM

I am trying to connect my esc to the pc but the box just says connecting and the SP software has everything grayed out..what am I missing? ps my version is

V1.07_110119 lCD
and esc is V1.10_090205MOD but it won't let me update the esc? is the sofware not supported on windows 64bit?

esc is a gt 2.1EX

my LCD Box quit working...it won't show anymore text how do I go about returning it? and what is the turn around?

All times are GMT -7. It is currently 06:48 PM.

Page 51 of 385

Show 40 post(s) from this thread on one page