If nothing works...send it in for warranty service...but please file the RMA process before you send it in....

http://www.speedpassion.net/us/rma.asp

hi guys
i've been running a Team associated SC-10 with a GT2.1 esc and 13.5t motor

last weekend we ran 10 min races and ended up with a very fast SCT

Gearing is 87/17
drag brake 0%
DDRS Start mode 3
Maxium Brake force 100%
Maxium Reverse Force 100%
Boost timing 24 deg
Turbo open time 24deg/.1 sec
Turbo Timing 36 deg
Boost start rpm 4000 rpm
Boost timing ACC 450 rpm/deg


motor was comming off at 155-160 deg F
the track was very loose and powerdy
Day high temp was 11 deg C

Found the setup very handy for getting passed vehicles in the mid to late sections of the streaights

the only trouble i had with the setup was trying to keep the front tyers on the ground between corners and catching back markers at very high speeds

Finished 2nd to my Team mate ( useing a tekin with a simular setup) by only 12 seconds and a full lap ahead of 3rd

JP RICHARDS

Whats up dude...hope all is well!

Hey man, what speedo for 4wd mod? Im looking to replace my sxx TC soon.

Im not J.P., but I use the GT 2.1 PROstock with a V3 8.5 and no fan all day long. This is on my Cat SX3.

Im looking at the the silver gt 2.0 PRO.....will it fit nicely in my Kyosho fs2 does anyone know?

You will be fine.

what mod soft ware is most current i have 3 to chose from v.1 205 v.2 528 v.3 119

So i had a catastrophic failure in my gt2.0 last night... since I haven't been running a fan, the 5 wire port that take the fan plug and the servo wire, is missing the fan. I had unplugged the servo wire, and accidentally plugged it back in one wire over, and in less than a second, the switch wire, and the servo wire were a heaping mess of melted wires gone up in smoke... Lost the speedo, and the servo... and 2nd degree burns yanking the wire out... bye bye SP!!! :mad:

dang thats not good sorry to here that man

Looking for some POC contacts to track down my RMA. Followed the RMA procedure, website showing "awaiting arrival". ESC arrived a few days ago according to the USPS. Just wanting to make sure it doesn't fall through the cracks. Thanks.

What turn motor? Class?
205MOD is default on GT2.0's... That's what you want to go with. Some have used 323 with success..

PM Solara and he will give you an update for your RMA.

Thanks.

I have heard of people running the 323 software, but turning the boost feature etc. off. Surely that makes is like the 205?

I am running epic D3 8.5 so i don't think the 323 software would work. I was just curious of the other programs its been a year since I ran the mod settings