Raced yesterday inbetween the rain drops at Litchfield raceway in Michigan. New stock software is awesome. Here is my settings. SC10 Duo 3 17.5 with 5degrees on endbell. Pro Stock v2.1 with 323 software. 22/87 gearing.
1. forward/brake
2. drag brake 0%
3. cut off 3.2v
4. DRRS 7
5. max brake 100%
6. max rev 25%
7. initial brake 0
8. dead band 6%
9. Boost timing 40
10. turbo slope 6degree/0.1s
11. over heat protection 95c
12. turbo timing 20
13. boost start RPM 1000
14. turbo delay 0.1s
15. boost timing acceleration 50 RPM
145-150F on motor after 5 minute. Truck felt really good, I was able to pull away from others on the straight away. I ended up 9th out of 28 Stock SCT after qualifing but the rain ended our day early. Nice Job Speed Passion :nod:

That's pretty close to where I ended up with my B4 Tom. I ran less brake, less DRRS punch, and a slower turbo slope. Our track was dry and slick most of the day. Similar motor temps to yours, about 155 deg, speedo (LPF 2.0) was about 140. Even my GT 2.0 Pro was pushing 130 with the fan running in 4wd.

okay ran at the track today with my new sct mater combo with 11.5 laps were consistant but the speed was not there so we decided to push the envolope as hard as we could and i mean push it please if your new don't do this alone get some help as i did no upgrades to esc yet and a 7.5 novark motor and this thing handled it with no problem esc never over 100 deg and motor at 160 after some gearing and testing [thats at 15 or 20 mins of run time lol could get enough very impressed with this esc here is the program card settings
1-4
2-1
3-2
4-1
5-1
6-1
7-5
8-2
9-1
10-4
i put this system in a losi calandra conversion and is one of the fastest trucks at the track week in and week out thanks again for such a great esc comb

Short course master seems slow
 

Hi there,
Just picked up the SP Short course master and plugged it into my Losi XXX SCT. I have a Tekin Redline 17.5 motor in there and after getting everything all soldered up and running it, it just seems very slow. It might be gearing (23/88) but it just sounds like the motor isn't spinning up to it's highest RPMs. Seems like it was faster with the RTR combo that had the same spur but a lower pinion. Is there some setup issue that I'm missing?

Thanks.

GT2 does work GREAT with those motor..........you can see some of our drivers' setup sheet are indeed using other brand motor.

But again...I am talking about 2S racing only.

Glad you like it....

TIMING.........turn it all on (from the ESC).

How many of you are using the new mod software?

is any one running blinky mode for spec racing?:tire:

Can I get some help from a Speed Passion representative? I placed an order on April 21 through the website and immediately got my order receipt stating that I should have the order within a week. As of today I have not received the order or any other type of correspondance. I have emailed the customer support email listed in the original order email receipt- [email protected]- but it bounces back when I try to send an email. Any help would be greatly appreciated.

Jon, please call this number and talk to Albert...he has info about your order, 1-888-928-1328

Thanks for the quick reply. I will give him a call- really looking forward to getting the esc and giving it a try.

Thanks again- Albert got me all squared away. Apparentl the package was returned to the sender (dang USPS!), but he resent it and sent a fresh tracking number. Should have the package early next week.

Yes, our direct sale website still has a lot of improvment to work on, but nothing better then a phone call to Albert and he will get that take care of. And yes....we just cannot do anything if USPS UPS or Fedex did not do their job.

I hope to see you at Leisure soon......Walt G, Mike K Mike F were amoung a few that ran SP there.

hey there heres my thought on the 11.5 motor that comes with the combo it's not the fastest motor out there but my times were the same lap after lap very consistant and i think that motor will be a good motor in lose conditions so i would hold on to it .it is a lower end speed passion motor so it's going to be a good motor in the right conditions upgrade motor and things will get better .if you ordered it from a-main the speed control was the same price as the combo so it was a free motor in my book nothing wrong with free