![]() |
Originally Posted by Cain
(Post 8599533)
has the motor one changed? Did some searching and found this on the website:
I have to say though that these warranties are EXCELLENT, and if the motor one is now 365, that's icing on the cake. I always believed that if you make the best products you should be able to back them up with the best kind of warranties. |
Originally Posted by AEfactoryteam
(Post 8597176)
How much will the systems be? With the Vtrax10 will it be like 220 or what?
|
Originally Posted by Cain
(Post 8599641)
no prob. Excellent warranties.
As a side question, and please forgive me if this has been asked already, but for the 1/8 electric stuff, will there be a separate ESC you guys are doing or will the ones listed on the website be what is used for 1/8 electric too? For the ESCs listed on the website, what are the specs are far as limitings for lipo usage, BEC rating, etc? The Vtrax10 and 10R have an adjustable BEC output voltage of 5-7v in 0.1v increments. I'm uncertain of the BEC current rating, if you're interested in that too, I believe it's about 5amps constant. When there are official esc specs available everyone will be well aware. Here are some other specs I can give you right now to tide you over: Vtrax10 motor limit - 5.5t (non boost) on 2s lipo/7.4v Vtrax10R motor limit - no motor limit 2s lipo/7.4v 2-4s lipo (7.4-14.8v) If you have questions about any specific details let me know and I'd be happy to give you the best answers possible right now :D |
Originally Posted by aSab
(Post 8550684)
okay, impressed so far - what about the warranty and a possible trade-in program for motors that ran out of the initial warranty period? can we Europeans also count on your warranty, even if we brought it from a US webshop?
|
Just got my 13.5 in the mail on Sat. Looks real nice. Can't wait to run it. It will be in a xxx buggy. Unfortunately since the Vtrax isn't out yet, I had to pair it with a Tekin RS for now. I prefer to keep them the same company usually. I'm fairly certain no one at my local track has one of these yet, I like being an early adopter of good products. From what I've been reading, I can't wait to blow them away :lol: I'm sure there will be lots of questions, depending how I do of course ;)
|
SloRacer you will love the 13.5. I have been running mine in my TQ SX10 Buggy for almost a month now and it is super smooth. I have the timing on the endbell set at 45 degrees and the motor is still super cool. I race at Long Island Raceway every Friday if you have any questions about it feel free to shoot me a PM or since you run at the Barn come on down on a Friday I think a couple of guys from there have been making the trip.
|
for 550 SCT use, will both ESCs work fine?
Thanks for all the info guys! |
What motor setup do you recommend for a 4x4 sc? I'll be running the new ae 4x4 once it arrives.
|
What motor would you guys recommend for these tracks? I was going to go with something in the 8.5 range in my 4wd and a 13.5 in my SC for the outdoor track, and a 10.5 for my 4wd for the indoor track.
After reading all the posts I am thinking a 17.5 for my SC and a 10.5 for my 4wd should be enough. It that right? The layout of the outdoor changes, it's not always that flat. Now the indoor will prob be doubling in size next year. I will be placing my order ASAP. http://www.youtube.com/watch?v=2uqTWcq6Px4 http://www.youtube.com/watch?v=EOqDc..._order&list=UL |
Originally Posted by Jamie James
(Post 8609605)
What motor would you guys recommend for these tracks? I was going to go with something in the 8.5 range in my 4wd and a 13.5 in my SC for the outdoor track, and a 10.5 for my 4wd for the indoor track.
After reading all the posts I am thinking a 17.5 for my SC and a 10.5 for my 4wd should be enough. It that right? The layout of the outdoor changes, it's not always that flat. Now the indoor will prob be doubling in size next year. I will be placing my order ASAP. http://www.youtube.com/watch?v=2uqTWcq6Px4 http://www.youtube.com/watch?v=EOqDc..._order&list=UL |
ok. Kind of thought so. I just keep hearing about the guys running the 17.5 in mod and doing well.
|
You should be Ok with a 10.5 in 4wd. Really depends on the length if the straight if you feel you need more top end. But with todays esc's you can make a 10.5 awful fast.
|
Originally Posted by nikos2002
(Post 8610453)
You should be Ok with a 10.5 in 4wd. Really depends on the length if the straight if you feel you need more top end. But with todays esc's you can make a 10.5 awful fast.
|
Originally Posted by Jamie James
(Post 8610173)
ok. Kind of thought so. I just keep hearing about the guys running the 17.5 in mod and doing well.
|
now on the 7.5 and 8.5 what battery size should i run if i have the 10r esc with it? note 4x4 use.
|
| All times are GMT -7. It is currently 03:07 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.