![]() |
Originally Posted by Hatebreed
(Post 7915410)
getting a little confused here!
i have a xerun 120 and 60a esc (both 2.0) but i want a smaller one in my f1 car and just saw the justock! but i read 2 different specs: 1. cant run hotter than 13t motors and dont have stock software 2. run down to 8.5t motor and have stock software from start what is the correct specs for the xerun justock??? http://www.racersinexile.org.uk Should be up around 2PM London Time 'Finally' lol What a nightmare DNS settings are ................ |
Originally Posted by speedmonster1
(Post 7917140)
i have a turnigy 60amp car esc can i use the hobbywing progarm card for it
|
Originally Posted by cherry2blost
(Post 7917144)
JUSTOCK has fixed timing and is aimed at non timed classes, EXTREME STOCK is the full fat turbo nutter speedo which I hope to have a stock of in the VERY near future for the UK users. :blush:
http://www.racersinexile.org.uk Should be up around 2PM London Time 'Finally' lol What a nightmare DNS settings are ................ went to your website bit its very slow, and the pages wont show? would be nice to order from europe, faster and no custom fees.. |
Originally Posted by cherry2blost
(Post 7917144)
JUSTOCK has fixed timing and is aimed at non timed classes, EXTREME STOCK is the full fat turbo nutter speedo which I hope to have a stock of in the VERY near future for the UK users. :blush:
http://www.racersinexile.org.uk Should be up around 2PM London Time 'Finally' lol What a nightmare DNS settings are ................ Good to see you got a supply up and running in the UK .... but your pricing after all your raging against the main distributor is exactly the same as that when it is shipped from over here :lol::lol: Actually it is more expensive because we dont have to charge tax when shipping o/s |
Originally Posted by ixlr8nz
(Post 7915487)
New software has just come out in the last couple of days on the hobbywing website. Whats new or been changed this time?
Mike |
Originally Posted by defcone
(Post 7917384)
I looked everywhere, can't find what's new.
|
...
|
Originally Posted by cannon
(Post 7917332)
Cherry
Good to see you got a supply up and running in the UK .... but your pricing after all your raging against the main distributor is exactly the same as that when it is shipped from over here :lol::lol: Actually it is more expensive because we dont have to charge tax when shipping o/s OK hands up I was wrong, I admit it :blush: I know you are able to NOT charge Aus Taxes but unfortunately that doesn't stop HM goverment from levying 17.5% VAT as well as a mysterious 'duty' charge on stuff coming into the UK, once the shipping from Austrlia is taken into account and the Charges which also include an £8.50 charge from OUR Post Office just for the joy of CHARGING the VAT / DUTY etc makes it still cheaper. My colleague also cocked up on the website as it was supposed to be FREE shipping for Royal Mail Special Delivery. We are also guaranteeing the buyers a next day delivery so no waiting 2 weeks for the stuff to show up. Cherry xx |
Hi i would like to ask some question, about supercharge, am still new in TC and have been using hobbywing supercharge for nearly 2 month now? I didnt know weather am posting on the right thread here or not.
My question here is if using hobbywing 518 stock what are the recommended motor timing, coz all this while am using +5 motor timing using a combo of HW 120a v 2.1 with SP v3 11.5T speed are extremely fast using 6.8 fdr, but after 5 min run max temp is around 75 to 80c, is this normal or need to reduce the motor temp, coz what i heard about over temp the motor will shorten the live of the motor... Anyway what is the recommended motor temp using HW esc, though i ve set esc motor overheat cut off eneble what is the exact amout of motor overheating before the esc to cut off.. Thou i havent run the motor up to esc cut off... Please someone on technical support need some explaination |
indoor 13.5 set up questions
I am gonna enter this winters rug racers, and in preparation I want to know if someone can help me on set up.
I have 518 software, what settings for 13.5 should I be using? Should I switch off the turbo? help me Lohan |
I currently own a SP GT2.0 Pro. I love it and have been racing it without the turbo/supercharge function in a T4. Its already fast. I can't imagine what the boost is going to do to it! Our short course rules have changed and now I'm going to buy another, or a xerun 120, for my SC10. I'm going to run a 17.5. Anybody have set up tips for offroad? I've spent many hours reading all 80 pages of this thread but there is very little mention of Short Course Racing. Am I alone here? I'm in Southern California where I believe Off-Road racing is much more popular....
Also, what should I be paying for the XERun systems? Why can't I buy a full system with a 17.5t motor??? I can only find 13.5 and 10.5 systems but no 17.5. We seldon run faster than 10.5 in 2wd SC.... |
By the way. I got a smoking deal on a xerun 120, lcd box, and 13.5T motor for $149.99 USD from HobbyPartz.com which is located here in Southern California. I don't know if they have a store or do mail order only but they are assuredly nearby as their telephone area code is 626 which puts them in the San Gabriel Valley Area.
|
Tried the new xerun 120A 1s with LRP x12 10.5T for the first time in my 12th scale, no receiver pack is needed and got to say I like the feel of the HW compare to Tekin RS with v203 firmware(dont like v208)it has better bottom and midrange drive then RS which for my track it is necessary. Only problem that I have is temp on speedy is at the high side which I am not expected ESC with 120a rating, I have only use Boost timing with no SuperCharge so I guess the ESC/motor is not the good combo will try with SP motor next time to see if make any difference.
|
Originally Posted by Lohan
(Post 7919483)
I am gonna enter this winters rug racers, and in preparation I want to know if someone can help me on set up.
I have 518 software, what settings for 13.5 should I be using? Should I switch off the turbo? help me Lohan pps, we have had some rug racer polo t shirts made for the series by nibbodesigns.co.uk and they are top class. cant stress enough how good they are. they will make you what ever you need from a baby grow to a winter jacket. visit their website, you wont be disapointed. also booking in is now open for rugracers at the usual central booking. |
Originally Posted by AGNO
(Post 7917670)
I think that the update is dedicated exclusively for the series 80A 150A
The Real New Firmware is about to release, build in RPM Log And DMTS Start RPM. a fix for DMTS. Better Stock Firmware. |
| All times are GMT -7. It is currently 02:52 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.