4LikesNEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
05-20-2013, 02:22 PM
hey guys,
I got the Hobbywing control box for my XeRun ESC V2.1 but I'm having problems downloading the software on my computer. My windows 7 laptop keep saying it doesn't recognize the RAR file and doesn't know what app to open it with.
Can you help me figure what I'm doing wrong!
Thanks in advance1
I got the Hobbywing control box for my XeRun ESC V2.1 but I'm having problems downloading the software on my computer. My windows 7 laptop keep saying it doesn't recognize the RAR file and doesn't know what app to open it with.
Can you help me figure what I'm doing wrong!
Thanks in advance1
05-21-2013, 06:26 AM
Tech Adept
I would strongly suggest dropping the boost end RPM, to closer to 30,000, and adding more of it. 60,000 you'll only ever get close too at the end of the rev range, by which time it's doing diddly squat, as the turbo would have taken over by then (very very very unlikely you'll hit 60,000rpm without getting full throttle basically).
As a good baseline, have a look at the worlds settings from Andy Moore (here) that are up on the Hobbywing site. Very good reference points to use, and what I base my settings on, although need to be a little different due to the rather grunty ProAmps motor's I'm using.
HiH
Ed
As a good baseline, have a look at the worlds settings from Andy Moore (here) that are up on the Hobbywing site. Very good reference points to use, and what I base my settings on, although need to be a little different due to the rather grunty ProAmps motor's I'm using.
HiH
Ed
ended up with the boost from 14000-38000. dont know how much degrees are set now for boost and turbo (marc fisher set the speedo for me) but speed was great and unexpectely still very smooth bottom power. i think it was overall very close to andys setup from the worlds in the end. used a thunderpower 4.5T geared 1:8,0 and 20deg timing on the motor with fan. weather was very cold (15°c) so motor temps were not an issue.
05-21-2013, 08:11 PM
I have a Hobbywing V2.1 60a esc. When you engage the throttle the motor does not spin.. If you turn the real wheel a little the motor will take off. If you unplug the sensor wire the problem goes away and it acts like an unsensored motor. Have tried 2 different motors and a few different sensor wires. Recalibrated the radio. Nothing seems to fix the problem.
Any suggestions?
Any suggestions?
05-21-2013, 08:34 PM
Looks whats coming racers..................
Paul Rush
HWNA Team Driver
Paul Rush
HWNA Team Driver
05-21-2013, 08:36 PM
I have a Hobbywing V2.1 60a esc. When you engage the throttle the motor does not spin.. If you turn the real wheel a little the motor will take off. If you unplug the sensor wire the problem goes away and it acts like an unsensored motor. Have tried 2 different motors and a few different sensor wires. Recalibrated the radio. Nothing seems to fix the problem.
Any suggestions?
Any suggestions?
Paul Rush
HWNA Team Driver
05-21-2013, 11:03 PM
05-22-2013, 02:15 AM
Available T: 3.5, 4.5, 6.5, 8.5, 10.5, 13.5, 17.5, 21.5
05-22-2013, 05:30 AM
hey guys...I'm new to the Hobbywing line of speedos (coming from the 'smaller,faster' speedo camp)
how does the JustStock speedo compare to the other brand speedos? most of the locals at my track run either the tekin or LRP - so kinda of looking for a baseline as to how everyone feels the speedo does against the 'big boys'
thanks
kaybo
how does the JustStock speedo compare to the other brand speedos? most of the locals at my track run either the tekin or LRP - so kinda of looking for a baseline as to how everyone feels the speedo does against the 'big boys'
thanks
kaybo
05-22-2013, 07:26 AM
05-22-2013, 12:14 PM
Tech Adept
hi guys,
just curious whats now the latest software version for running modified boosted?? the software names dont make sense. this should really be sorted somehow. i have a v.3.0 speedo and downloaded the latest 3.3 usb software link. i have the options of:
v3.1_121129_beta
v1.1_120918_beta
v1.1_120504
thx for any help
just curious whats now the latest software version for running modified boosted?? the software names dont make sense. this should really be sorted somehow. i have a v.3.0 speedo and downloaded the latest 3.3 usb software link. i have the options of:
v3.1_121129_beta
v1.1_120918_beta
v1.1_120504
thx for any help
05-22-2013, 03:13 PM
hi guys,
just curious whats now the latest software version for running modified boosted?? the software names dont make sense. this should really be sorted somehow. i have a v.3.0 speedo and downloaded the latest 3.3 usb software link. i have the options of:
v3.1_121129_beta
v1.1_120918_beta
v1.1_120504
thx for any help
just curious whats now the latest software version for running modified boosted?? the software names dont make sense. this should really be sorted somehow. i have a v.3.0 speedo and downloaded the latest 3.3 usb software link. i have the options of:
v3.1_121129_beta
v1.1_120918_beta
v1.1_120504
thx for any help
Firstly, 'v3.1' refers to the latest software spec, it isn't anything to do with the speedo its suited for. Secondly, the second part of the name is the date, in YYMMDD style.. So it was made on the 29th Nov 2012.
HiH
Ed
05-22-2013, 03:20 PM
I have a Hobbywing V2.1 60a esc. When you engage the throttle the motor does not spin.. If you turn the real wheel a little the motor will take off. If you unplug the sensor wire the problem goes away and it acts like an unsensored motor. Have tried 2 different motors and a few different sensor wires. Recalibrated the radio. Nothing seems to fix the problem.
Any suggestions?
Any suggestions?
05-23-2013, 03:52 AM
@cobraracing.
What is the lowest possible timing on the new hobbywing xerun motors? Reason I ask is that the old xerun motors with fixed timing bell work very well in boosted and I don't really want to have more motor timing than that.
The sensorplug on the new motors is not really nicely placed imo. The old motors had the sensor to the side and the new ones goes up which isn't as efficient for sensorwire placement.
What is the lowest possible timing on the new hobbywing xerun motors? Reason I ask is that the old xerun motors with fixed timing bell work very well in boosted and I don't really want to have more motor timing than that.
The sensorplug on the new motors is not really nicely placed imo. The old motors had the sensor to the side and the new ones goes up which isn't as efficient for sensorwire placement.
05-23-2013, 04:28 AM
@cobraracing.
What is the lowest possible timing on the new hobbywing xerun motors? Reason I ask is that the old xerun motors with fixed timing bell work very well in boosted and I don't really want to have more motor timing than that.
The sensorplug on the new motors is not really nicely placed imo. The old motors had the sensor to the side and the new ones goes up which isn't as efficient for sensorwire placement.
What is the lowest possible timing on the new hobbywing xerun motors? Reason I ask is that the old xerun motors with fixed timing bell work very well in boosted and I don't really want to have more motor timing than that.
The sensorplug on the new motors is not really nicely placed imo. The old motors had the sensor to the side and the new ones goes up which isn't as efficient for sensorwire placement.
new ones go from 18 degree fixed to 35-40 adjusted dont hold me to it ill have a look at a motor and ill measure the angle of the sensors and let you know tomorrow but im sure im close with my estimate
05-23-2013, 04:30 AM
Tech Adept
Latest version is v3.1_121129_beta. I know the names are a little confusing, but the clues are in the name.
Firstly, 'v3.1' refers to the latest software spec, it isn't anything to do with the speedo its suited for. Secondly, the second part of the name is the date, in YYMMDD style.. So it was made on the 29th Nov 2012.
HiH
Ed
Firstly, 'v3.1' refers to the latest software spec, it isn't anything to do with the speedo its suited for. Secondly, the second part of the name is the date, in YYMMDD style.. So it was made on the 29th Nov 2012.
HiH
Ed
any pointers towards the difference between the 504 and the 129?btw. ended up 31deg boost (13k to 38k) and 21 turbo.
thx