R/C Tech Forums - NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE

- - NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE (https://www.rctech.net/forum/radio-electronics/393690-new-hobbywing-stock-supercharged-software.html)

M7H	02-28-2013 06:22 AM

Have you tried the hobbywing site?

COBRARACING

02-28-2013 09:07 AM

Quote:

Originally Posted by Metalsoft (Post 11872792)

Where can I find the latest software for the Juststock ESC?

Download the usb link 3.2v from www.hobbywing.com once you have installed it plug in your lcd box to esc and pc once you open the program it will show you on the drop menu what you can use .It will only display whats available for the justock nothing else

COBRARACING

02-28-2013 09:12 AM

Quote:

Originally Posted by jensen123 (Post 11872363)

Hi angelo,

I use your esc for about 3 years, so far so good even from 2.1 to 3.1versions . But recently I got two defective , they are v3.0 and 3.1. Before the problem happpen they were running with a TP 4.0 motor with gear ratio of around 8.3 in 1/10 touring car. Both problems are no output to the motor or it need some pushing force to make the motor rotate but however, finally no response although changing with a brand new motor or sensor cable.
I am now using the V3.1 again, but my setup is a little bit change only. That is to reduce the drag barke from 20% to 5% only. It already run for one month and so far so good. Will the stronge drag brake force killed those escs? Would you please advise me what the approiate drag brake force should be use for the class of racing?
Thanks a lot!

Thats alot of drag brake id adjust it to 8% also the esc that you have to push the model for the motor to work have you tried running it without a sensor if you have and the issue is still need to push the model to kick start it then you have damaged one of the phases if it works without the sensor wire then the sensor port is damaged.

S.Stew

02-28-2013 09:37 AM

Any update on the 1s V3 or V3.1?

Thanks

ByteStream

02-28-2013 01:28 PM

Quote:

Originally Posted by S.Stew (Post 11873508)

Any update on the 1s V3 or V3.1?

Thanks

You can pre-order the V3.1 - http://www.falconsekido.com/

Shipping Mar 18th.

Steve S

02-28-2013 01:47 PM

That does not show the 1S version

ByteStream

02-28-2013 02:21 PM

Quote:

Originally Posted by Steve S (Post 11874365)

That does not show the 1S version

I didn't say it did, you asked for an update on either.

Steve S

02-28-2013 03:12 PM

It wasn't me asking, but I took it to mean he was interested in the new 1S speedo, whether it was called a V3 1S or V3.1 1S

Huskerfan1212

02-28-2013 06:08 PM

I have a new v3. Works fine in all modes but blinky. The motor cogs. Never runs longer then a second. Is there something im doing wrong?

pauper

02-28-2013 06:21 PM

Quote:

Originally Posted by pauper (Post 11861728)

Can anyone tell me how to downgrade v3.2 software to v3.1 I always get the message that cannot downgrade tanks.

anyone please

TCCustoms

02-28-2013 06:24 PM

Quote:

Originally Posted by pauper (Post 11875605)

anyone please

If this is on the LCD box...you cant! This is why i always tell people, if its not broke, dont fix it, and this is one of those things

pauper

02-28-2013 06:36 PM

Quote:

Originally Posted by TCCustoms (Post 11875625)

If this is on the LCD box...you cant! This is why i always tell people, if its not broke, dont fix it, and this is one of those things

tanks for your reply. I did downgrade the lcd box from v3.2 to v3.1 526 but not the esc i try do downgrade the esc and get always the message can´t downgrade. the problem is the esc not the lcd box

TCCustoms

02-28-2013 07:13 PM

Quote:

Originally Posted by pauper (Post 11875700)

tanks for your reply. I did downgrade the lcd box from v3.2 to v3.1 526 but not the esc i try do downgrade the esc and get always the message can´t downgrade. the problem is the esc not the lcd box

hmm, i thought it was the other way around...as for that im not sure and hopefully someone can help out since all i do is change from blinky to something else but never did the firmware

I would try to email COBRARACING if you can...he's the tech guy and Bytestream is another good guy that can help

TryHard

03-01-2013 02:45 AM

Quote:

Originally Posted by pauper (Post 11875700)

tanks for your reply. I did downgrade the lcd box from v3.2 to v3.1 526 but not the esc i try do downgrade the esc and get always the message can´t downgrade. the problem is the esc not the lcd box

I think the issue that you can't down grade is because your LCD box is (now) on V3.1. Try putting it back to the V3.2, and then try downgrading the software.

If you want to do the ESC properly (and I know this works, as I've done it a few times on my esc) then you need to do it in the right order, especially if your at the latest software already... have a look on page 705 of this thread, myself and j.d.roost discuss downgrading to an older version.

Page 705

But in short, if you have V3_121129_beta on the ESC, then you need to use the V3.2 USB link, and downgrade to 'V1.1_120526', then switch to the V3.1 USB link of your choice.

HiH
Ed

COBRARACING

03-01-2013 03:08 AM

Quote:

Originally Posted by Huskerfan1212 (Post 11875536)

I have a new v3. Works fine in all modes but blinky. The motor cogs. Never runs longer then a second. Is there something im doing wrong?

I need some more info.If your saying it works well in all other modes but zero timing thats impossible.How high is your punch rate on the zero mode?how do you set your zero timing mode?

Please give me more info on exactly what your doing to set it up.

All times are GMT -7. It is currently 11:35 PM.

Page 708 of 837

708

Show 40 post(s) from this thread on one page