R/C Tech Forums - NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE

- - NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE (https://www.rctech.net/forum/radio-electronics/393690-new-hobbywing-stock-supercharged-software.html)

ByteStream

08-18-2012 07:35 AM

Quote:

Originally Posted by FFred (Post 11107099)

Then there's a problem in every naming since North America = USA+Canada :

CRC should be "Hobbywing North America distributor" (and not USA only)
FalconSekido and Schuur Speed should be "Hobbywing USA distributors" only (and not North America)

Only FalconSekido is on the official Hobbywing site as a distributor ... perhaps an update is in order.

Fred Hubbard

08-18-2012 10:54 AM

Quote:

Originally Posted by COBRARACING (Post 11106871)

More power for the v3 ,smoother plus better at low rpm you dont get thst stepper feeling from the motor.We will also implement neutral range in a week or two as a function.

Quote:

Originally Posted by ByteStream (Post 11107398)

Sounds good as the neutral range I feel is a needed function.

ROAR currently has V1.1_120511_beta as the approved version of the V3 software which is not the current version .. are there plans to get the current version approved ... (IIC is the first week of October)

I'm very happy to hear that! Over a year ago I tried to get one of your clients to work on this to no avail.

lewis110

08-18-2012 11:57 AM

Quote:

Originally Posted by puma303 (Post 11106977)

hello all
Today I paired my new hobbywing motor 4000 Kv (the 4.5T sensorles). I also connected the cable to the sensor but my program box 2 in 1 does not find the option to enable or disable the sensor. I wanted to know if i could only do via PC, I have no way of being able to connect to the computer and test now. Thanks for the replies. (The ESC is always 150A)

There is no option to turn on or off the sensor. That happens automatically inside the esc.

FLAT OUT

08-18-2012 12:58 PM

Quote:

Originally Posted by FLAT OUT (Post 11106922)

Hi people
When I connect my V3 to the digital program box and turn it on it comes up with V1.11_120331_V3 is this the current version/software for my V3 ?? If not what is the new one and how do I get it and install it

Many Thanks

Bump

ManxPlumber

08-19-2012 06:48 AM

Are there any plans to improve the firmware for V2.1 xeruns?

...I'm using V1.08 which is part of the latest V3.1_120808

...the 'no-reverse-when-using-initial-brake=drag-brake-in-fwd/brk/rev-mode' glitch is still there!

Kev

iwkyb

08-19-2012 07:38 AM

What is the most current Xerun V3 firmware?

I Installed the lastest USB link (version 808) but I don't see any option to upgrade from the current firmware (511 beta)

hanulec

08-19-2012 08:20 AM

Quote:

Originally Posted by FFred (Post 11107099)

Now I've seen everything... folks arguing over who distributes something... WOW!

FLAT OUT

08-19-2012 03:52 PM

syndr0me

08-19-2012 05:22 PM

I downloaded the latest software off the site today and it only let me go to 120551_beta which happens to be the ROAR legal version. The file I downloaded said 120808, but that wasn't available to install.

f1o7x9

08-19-2012 08:35 PM

Thank you angelo for the help. Everything worked perfectly. Quick question, what is the safest max. Temp to run the V3 esc.

Barry_Hughes

08-20-2012 06:36 AM

Quote:

Originally Posted by FLAT OUT (Post 11111538)

That is the current version of software for the program box, which contains the latest firmware for the V3.

The latest firmare for the V3 available to us mere mortals is 511 beta.
I believe there is another beta firmware but this was only made available to the works Hobbywing drivers

FFred

08-20-2012 02:21 PM

Quote:

Originally Posted by hanulec (Post 11110399)

Now I've seen everything... folks arguing over who distributes something... WOW!

Maybe I didn't explain it the right way, or you're misreading me, but I didn't talk about, in any way, how it should be distribute, but how the "North America" and "USA (only)" use is wrong if the distribution is like Angelo said (and it's anybody's job to talk about any mistake that could have been made).

I've never said "CRC should be the one doing A distribution, FalconSekido B distribution and SchuurSpeed C distribution" like you're saying in your post (because it's not my job to do so).

It's a big, big difference of point of view.

Maybe I should have said it like this:

Quote:

Originally Posted by FFred (Post 11107099)

since North America = USA+Canada and CRC is the only one distibuting in both USA and Canada :

CRC should be called "Hobbywing North America distributor"(and not USA only)
FalconSekido and Schuur Speed should be called "Hobbywing USA distributors" only (and not North America)

I hope everybody can understand the meaning of my post now ;)

gom	08-21-2012 07:23 PM

Hi guys, I just got a xerun 120a v2.1. running a Reedy Sonic 9.5 Modified motor. Which ESC firmware version should I use? v3.0_110930_MOD? or v3.0_110930STOCK? What are the differences?

I am using firmware version v1.08_120504 in the programming box. First time using a programmable ESC, any help would be greatly appreciated.

syndr0me

08-21-2012 08:00 PM

511_beta feels pretty good with 13.5. I didn't like this ESC's drag brake in the past, but we've since changed our racing surface and drag brake is no longer a good choice.

The punch compared to other brands is pretty stunning. The LRP and Orca feel surprisingly flat compared to the V3.

NolanP

08-21-2012 08:31 PM

Quote:

Originally Posted by syndr0me (Post 11121422)

Now your coming to your senses. Pretty nice speedo huh. Still call dibs when you sell it next week.

All times are GMT -7. It is currently 11:02 AM.

Page 649 of 837