Just an update for those with V3 HW ESC's they have been tested and will be posted on the ROAR Approved ESC List within the week. :nod: For non-timing or "blinky" operation

What firmware version was submitted/approved?

What's the difference between the C-XERUN and the XERUN found on hobbypartz.com? My SCTE's RX8 has taken a dump again (1,2,6,7 led)... I loved my Orion r10 pro and Xerun 1s v2.1 in my SCTE but always went back to the RX8 because I'm already invested.

http://www.hobbypartz.com/07e-c-xerun-120a-sd.html
2-3s, 120amp, ?

http://www.hobbypartz.com/07e-xerun-...-1s-black.html
1-2s, 120amp, ?

Any real-world help/suggestions would be helpful!

not just the price
 

both are good unit just get the one that suits your needs
catch you around

Yes, great result at the 2012 Ifmar 1:10 Electric Touring ;)

1st - Jilles Groskamp - ORION Vortex R1 (Hobbywing OME)

2nd - Hatsushi Hara - V3 Hobbywing

8th - Andy moore - V3 Hobbywing

Excellent job of Michael :)

Sweet I was waiting for the 1s to fall under 100.

If your not going to be running 1s get the 2s-3s model. The 2s-3s has a higher amp output for the bec.

I have a quick question. Does the Xerun 120a v2.1 or the V3 come with the programming card when purchased? Or the programming card is sold separately?

Thanks for the answer in advance.

Quick question thst I cant seem to find a definite answer for here.

Does the v3 come with the newest firmware installed or do you have to do it when you get it? Or in other words, is there a newer firmware than the one in the V3 out?

The V3 sure is looking great. Have tons of ezruns for my outdoor rides and only one have ever failed, but have been an LRP ssx man for my competition use. I love the greater programmability with the V3, and the possibility of constant development of the firmware. The hobbywing people really seem to have the service and development procedures figured out. My choice is this or the Orion that I know is more or less similar. Like the black csse on th HW better though :-D

Brod,

Almost similar,only difference are the input voltage 1s being 1-2 cell with lower BEC amp output and the other one can take 2-3 cell with a much higher BEC output,if you are not going to use more than 2 cell lipo then 1s is ok ,check your servo rating if the BEC can provide the needed power,else you can get an external BEC/ glitch. Buster to eliminate some glitch issue from HV Servos.

Hi Angelo,

got it, thanks for the great and prompt support, till the next....planning to purchase V3, still doing budget costing... hahahah

If you buy it as a combo with motor yes you will get the program card if not you will not get a program card and will have to purchase it seperately

Dear Sir

Thank you for the kind words

No you will have to install the lastest software being the 511 beta yourself please send me an email at [email protected] or [email protected] and i will help you out

regards Angelo

thank you for your kind words

happy racing

got it. thanks cobra.

edit: just placed an order for the xerun 120a v2.1 and a programming box. can't wait for them to arrive!

Hi Angelo..

I pm'd you my gmail address, can you please send me the 1.64 USB Link software for my Xerun.
I need it asap as I am racing this weekend.

I don't want to install the V3.0 (which is the only one available for download from Hobbywing) and screw it up.

Thanks.