![]() |
Originally Posted by Bishop
(Post 9630550)
Yes, believe it or not guys are now using the stock firmwares with down to 4.0T motors, it's all a highly do at your own risk thing though, beware of gearing and how much timing you add...
|
Originally Posted by COBRARACING
(Post 9625910)
no they are steps as what degree of each step i dont really know how michael has configured it .But i will find out the true value of the steps .
|
Hobbywing software onto an Ezrun
Can you get other Hobbywing software onto an Ezrun esc. Got a 60amp 8.5 that id like to load a mod programme onto?
|
Hi all,
Forgive me if this question has already been answered. My question is, I have the Xerun 120 v2.0 and using a Novak Ballistic 4.5 motor, can I use turbo or boost on this motor at all? Or is there a motor limit to when you can use this feature? Thanks |
Originally Posted by highsiderider
(Post 9639484)
Hi all,
Forgive me if this question has already been answered. My question is, I have the Xerun 120 v2.0 and using a Novak Ballistic 4.5 motor, can I use turbo or boost on this motor at all? Or is there a motor limit to when you can use this feature? Thanks Yes you can boost just about any turn motor, top mod guys are boosting the 4-5 turn range now, is it recommended?, hell no. If your lacking the knowledge to know just what your are doing, stay well away from doing it, do it at your own and your equipments risk, and don't go crying foul when you melt something. |
Bishop,
Sorry, my bad. I just saw your previous post. I was in a hurry... Thanks |
Can anyone help , could do with a speedo set up for a 21.5 motor in a F1 ,
currently, boost 20 ,turbo 5 ,acc 400, start 3000rpm, 4/1 ratio ,turbo 0.1 28metre straight ,average 10second lap , mid to high speed track Thanks in advance |
Originally Posted by highsiderider
(Post 9639484)
Hi all,
Forgive me if this question has already been answered. My question is, I have the Xerun 120 v2.0 and using a Novak Ballistic 4.5 motor, can I use turbo or boost on this motor at all? Or is there a motor limit to when you can use this feature? Thanks earlier this year I was running a 5.5 with a 120 Xerun, and I ran 119 stock and had it going quite well. boost at about 10, turbo 8-10, 10,000 start rpm, 7# punch 350acc 18 slope. I got silly and wound 20 degrees boost and about 25 degrees turbo and went great for a lap. motor didnt get over 40c but ESC fried after 3 laps. so I'd say keep the settings moderate and you're good. don't get tempted to up them too high, if you need more HP go a lower wind. cheers :) |
Can anyone fill me in on the difference of 508 zero_rev vs 508 no_timing FW? Thanks!
|
Originally Posted by tommi
(Post 9641238)
Can anyone fill me in on the difference of 508 zero_rev vs 508 no_timing FW? Thanks!
|
Originally Posted by tommi
(Post 9641238)
Can anyone fill me in on the difference of 508 zero_rev vs 508 no_timing FW? Thanks!
|
Originally Posted by scoop
(Post 9636562)
Can you get other Hobbywing software onto an Ezrun esc. Got a 60amp 8.5 that id like to load a mod programme onto?
|
Hi Guys
Another fake ebay hobbywing seller http://myworld.benl.ebay.be/planemodel-a what a shame after 14101 feedbacks he's been finally put to rest DEAD and no longer active .:nod::nod: I will list my pdf file with all the ones i have located later this week . |
Originally Posted by COBRARACING
(Post 9642452)
no they use different cpu's
|
Any infow on the new esc pick's / price. Would be nice to see some comparison
with the old 120 amp to show the size difference. |
| All times are GMT -7. It is currently 01:20 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.