R/C Tech Forums - Keyence ESC

Page 41 of 53

Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - Keyence ESC (https://www.rctech.net/forum/radio-electronics/28202-keyence-esc.html)

jawa	05-01-2006 12:54 PM

Keyence Exstraight

Quote:

Originally Posted by AdrianM

Yeah..I just noticed that.

The ExStraight is super simple:

1. Turn it on
2. Push and hold the setup button until the LED start blinking
3. Keep you finger off the trigger and push the Set button once to set neutral
4. Pull full throttle and hold it then push the Set button to set high throttle
5. Push full brake and hold it then push the Set button to set max brake

There is a current limiter dial that should always be maxed out so it dose not limit the current.

There is a Min Brake dial that sets how much initial braking you get. I leave this at zero.

Is it necessary to use the schottky diode supplied with the Keyence Exstraight? What about the 3 capacitors if the motor already has surface mount caps (I use a 2x13 team orion revolution). Thanks.

AdrianM

05-01-2006 01:19 PM

You should run the Schottky Diode or a Novak, KO or Much More Super Schottky device on the ExStraight.

If your motor has caps on it or if you use smaller caps you dont have to use the "Corn Kernel" :D caps Keyence sends with the unit.

br241

05-01-2006 07:50 PM

Hello AdrianM,
Can you tell me the differences between Straight and Flash ESC's?
The flash kinda looks like a update of my A-07.
Thanks, Terry

AdrianM

05-01-2006 08:07 PM

The Exstraight is a Rapida with all the programming bits stripped off. Think of it as an LRP V6 but about 1/3rd the size.

The Flash is a is an updated A-07R.

jawa	05-23-2006 01:04 PM

Keyence A07-R

Anybody knows if the A07-R would work with 4 cells?

Hyperform Racing

05-23-2006 02:44 PM

Adrian, I have a Keyence that needs repair. Who do I send it to?

AdrianM

05-23-2006 03:09 PM

Quote:

Originally Posted by Hyperform Racing

Adrian, I have a Keyence that needs repair. Who do I send it to?

Schumacher, Inc.
6302 Benjamin Rd #404
Tampa FL 33634

Besure to include you contract information in the box.

Thanks,

AdrianM

Hyperform Racing

05-25-2006 12:21 AM

Thanks. No contract info, I'm going to have to pay for the repairs...

erock1331

05-25-2006 06:01 AM

Quote:

Originally Posted by AdrianM

The Exstraight is a Rapida with all the programming bits stripped off.

Adrian,
For oval applications (stock and 19T) most really dont mess with settings too much. Set it at low Drive Frequency and go. Does the Exstraight have the same Fets and on resistance (0.00023) as a Rapida Pro?

If so then the Exstraight might be a nice cheaper alternative for Oval racers.

Roberto Falcon

07-10-2006 07:44 PM

I bought a keyence dont know which one is it ,, zero extreme or rapida .. but I dont know how to set it up .. all it does it when i push brake on my 3pk it like throttle and when I pull on the trigger it brakes .. its backwards.. can anyone help me on how to setup this esc

theisgroup

07-10-2006 07:57 PM

press the setup button once. that will get you to the setup mode. then press and hold setup for 4 seconds. you will now be setting neutral. then hit the right arrow, that will be forward and then hit the right again and that is brake. hit right again and you are back to setup.

your transmitter should now be set.

Roberto Falcon

07-10-2006 08:41 PM

doesnt work

viper1

07-10-2006 09:25 PM

Quote:

Originally Posted by Roberto Falcon

Reverse the throttle contol on the transmitter before u try setting up the ESC again. The servo reversing needs to be corrected.

Cheers

nnick

07-10-2006 10:51 PM

You can download the manual from here

Nick

DirtyDog3375

07-10-2006 10:56 PM

Could have a faulty set button. I have a similiar issue, I cannot get my Rapida Pro to go into the set menu either.

All times are GMT -7. It is currently 04:26 AM.

Page 41 of 53

« First

Last »

Show 40 post(s) from this thread on one page