|
Originally Posted by ganymede
(Post 8251602)
Not sure what is the plug that came with the ESC. Correct me if I am wrong, unless it came with polarized Airtronics Z connector which can only be plugged in one way only.
If the ESC came with Futaba J connector, one has to trim off the tab on the connector for it to fit into the M11x receiver (451R for me), but after trimming tab off, it becomes non polarized and you can plug it in both ways which can lead to reverse polarity. So, instead of Signal, +ve and -ve, you will get -ve, +ve and Signal... |
Thanks for clearing that up, I have no idea it won't work if plugged in backward but I won't want to give it a try just to prove it... :D
Originally Posted by technazi
(Post 8255894)
If you plug it in backwards then it simply won't work. The polarity is not reversed as the wire sequence is generally signal, positive, and negative. If the plug is reversed, only the signal and negative wires are transferred so you're not reversing the polarity.
|
Originally Posted by goin2drt
(Post 8255741)
Yeah I don't know either but I really want the m11x and didn't know if I would have to buy 3 rx's:blush:
|
I just recieved my M11x, and I got to say: That thing is really balanced! Even with the LRP LiPo in the bottom of it, it isn't top-heavy as my 3PK was. And it is lighter to, and more comfortable.
I am going to test it out later on today. |
Are these specs the standard or SSR specs?
http://www.amainhobbies.com/product_...l-Torque-Servo I am looking for something in the .06-.11 speed and 250+ oz. inch of torque at 6.0 volt NiMh. A servo that is M11X SSR compatable. |
I have two new 92451sr that i can bind (solid blue light) but the receivers just wont work? I binded the original rx and a new 92451 two month ago with no issues, what am I doing wrong?
|
whats the word on leaving your lipos plugged into the TX...are your guys inplugging them or leaving them plugged in?
|
Originally Posted by MasiisaM
(Post 8278630)
whats the word on leaving your lipos plugged into the TX...are your guys inplugging them or leaving them plugged in?
|
which reciver can use with M11X ?
Thank you. |
Originally Posted by MasiisaM
(Post 8278630)
whats the word on leaving your lipos plugged into the TX...are your guys inplugging them or leaving them plugged in?
|
Originally Posted by fresh_trf
(Post 8279732)
which reciver can use with M11X ?
Thank you. FHSS-3 FHSs-3 SSR Rx |
Originally Posted by omarwashington
(Post 8280817)
FHSS-2
FHSS-3 FHSs-3 SSR Rx |
I always unplug mine and remove it from the transmitter after use...
Originally Posted by MasiisaM
(Post 8278630)
whats the word on leaving your lipos plugged into the TX...are your guys inplugging them or leaving them plugged in?
|
can the m11x monitor the rx batt voltage on a nitro?
|
Originally Posted by etivac13
(Post 8281925)
can the m11x monitor the rx batt voltage on a nitro?
|
| All times are GMT -7. It is currently 12:14 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.