R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)
-   -   Airtronics M11X (https://www.rctech.net/forum/radio-electronics/248505-airtronics-m11x.html)

mattwoodcraft 06-23-2009 05:26 PM

this is the best dam radio i have ever owned :nod: m11x awsome

Wonderkid 06-24-2009 09:34 PM

M11x
 
hi all, whats the diff between FHSS & DSSS?

jinxed 06-25-2009 06:20 AM

dss locks in to a specific 2.4 frequency

fhss hops from channel to channel automatically

backplate 06-28-2009 05:02 AM


Originally Posted by jinxed (Post 5983651)
dss locks in to a specific 2.4 frequency

fhss hops from channel to channel automatically

So which is actually more ideal or better? I'm thinking whether to buy a 2.4 set(DSSS) or just get the M11x(FHSS).. If i'm not wrong. both are different 2,4g system....

Thanks......

jinxed 07-01-2009 11:42 AM

fhss-2 is newer technology better times too i think

F-1 07-08-2009 05:20 AM

Hello, how i can change the model in menu?? I cant. I go to MODEL menu, after that i go to SELECT menu, push + and - buttons for choose the model, and i view on display - DISPLAY MODE ONLY. What is it?

exotica 07-08-2009 05:25 AM

...hold the display button to the right for three seconds and it will enter the program mode for your models.

walsmi 07-08-2009 05:35 AM

Hi,
i have a M11x too, and its a beautiful transmitter, i really like the steering wheel;)

But i have a question: The Antenna on the receiver is very long, so I wanted to ask if i can shorten it ?!? I had the Sprektrum SR3500 before and the antenna was very short, what i really liked :rolleyes:

EDit: Are there Lipo packs for it out now?

Thanks

Mike

F-1 07-08-2009 05:35 AM

Thank you!! And can i turn off sounds?

jinxed 07-08-2009 07:21 AM

1st question you can not shorten wire

2nd impulse has a 2500 lipo pack that fits perfect just have to put airtronics z connector on it.

3rd you can turn sounds off i think it is in the user menu if I remember right

Wild Cherry 07-08-2009 11:55 AM

Don`t cut that wire or rather its "coaxial cable" actually....:nod:
You can bend it into curves but never cut or kink the cable ...


Alert! Make sure that Li-Po mentioned is the correct voltage, M11x uses 7.2 volt....

All the tones can be customized ..
The instruction manual is most excellent & complete . Everything you wish you know how to adjust is easy to learn with the new instructions .....

jinxed 07-08-2009 11:58 AM

the lipo mentioned is 7.4

Wild Cherry 07-08-2009 12:09 PM


Originally Posted by jinxed (Post 6040737)
the lipo mentioned is 7.4

Yes , that voltage would work. However ,check the dimensions. That particular battery will not fit inside the transmitter...

Just so you know...:nod:

jinxed 07-08-2009 12:27 PM

????? It is sitting in my transmitter just fine? That is one that was recommended to me by Airtronics factory driver should last a 3 day weekend without charge:nod:

Wild Cherry 07-08-2009 12:59 PM

Reason I said is measurements say its .68 thick & only .50 available inside transmitter ...

I did`nt think it would fit...

PS Its a 2500 , the battery that come with is 1500 and lasts about a hour..

so I would estimate you will get a extra 40 min ....


All times are GMT -7. It is currently 03:45 PM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.