![]() |
The rx-451 and rx-451r for sanwa
The 92744 and 82451 for Airtronics should work with LiFe They are the only receivers rated for 7.4 lipo so should be good for LiFe |
Hi is anyone successfully using the traction control feature with electric cars? Preferably 2wd Mod off road.
Any pro tips? |
Lipo for the M11x
What is a good lipo pack to use with the M11x?
|
Originally Posted by kyle3333
(Post 6837020)
What is a good lipo pack to use with the M11x?
http://www3.towerhobbies.com/cgi-bin...9&I=LXSFS6&P=K |
I have been reading threw this post and am very much leaning toward going with the M11X with the 451 receiver. I was going back and fourth between it and the 4PK but everything I am seeing is telling me the M11X is the better choice.
Sean |
Trust me, it is a good choice. I just gotten it more than a week ago and gettin used to its so many functions.
Originally Posted by BLKNOTCH
(Post 6850748)
I have been reading threw this post and am very much leaning toward going with the M11X with the 451 receiver. I was going back and fourth between it and the 4PK but everything I am seeing is telling me the M11X is the better choice.
Sean |
Originally Posted by BLKNOTCH
(Post 6850748)
I have been reading threw this post and am very much leaning toward going with the M11X with the 451 receiver. I was going back and fourth between it and the 4PK but everything I am seeing is telling me the M11X is the better choice.
Sean |
Hello,
I`m thinking about buying the M11X, and i decided to get trough the topic here first, after reading i have few questions. There are two ver. JP and US ? Is there an EU version of sanwa M11X or JP is for EU market ? Is the US M11X the best choice ? Can I connect to the reciver 6.6V LiFe rx pack without regulator ? There will be no problem if i connect ESC which is powered by voltage higher than 6V ? Thanks |
Woo Hoo I just ordered mine this morning:D:D:D:D:D:D:D Along with the case.
|
There is hardly any difference between the Japanese version and the US version. They have the same range, and response time from what i can see. I own the US version but used the JP version for a while. Both are very nice and the receivers are interchangable...which is nice
|
Originally Posted by audriusv
(Post 6772894)
What is more important spare receiver will cost a lot less. An you can buy FHSS-2 receiver even cheaper if in no need for extremely fast response...
Btw., best LiPo pack for M11X transmitter :-) http://www.lrp.cc/en/products/vtec-b...y-74v/details/ |
Seams that all 4 of these receivers will work with the M11X but does someone know what the Airtronics numbers are?
RX-451R RX-451 RX-442DS RX-371 Thanks for the help guys. Sean |
If anyone could help that would be great, so i charged my lipo for my radio and went to plug it in like regular and then turned it on to make sure everything was good and then it shut right off, i checked the connector and made sure i was pluging in the correct way and i was. then i grabbed the stock nimh bat and tried that with no luck waited and tried the lipo again and it turned on then right back off i am lost. i was going to run tomorrow but may not now..
|
were you using a 3s or 2s lipo? M11x can't handle 3s like most other radios...
|
Originally Posted by Mr. Bojangles
(Post 6865242)
were you using a 3s or 2s lipo? M11x can't handle 3s like most other radios...
M11X only run with 2S lipo 7,4V you do not put 3S lipo this is for the old M11. Best Regards: Pedro silva |
| All times are GMT -7. It is currently 12:14 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.