|
Originally Posted by amp3d
(Post 16096219)
One issue I'm having though, is enabling WiFi on the ep2. I can enable wifi through the LUA however after about 10 seconds it shuts off. As such, it makes it hard to make binding phrase changes.
Do you experience the same issue? There are two ways to connect to Wi-Fi: one is to connect the EP2 to your home network, and the other is to use the EP2 itself as an access point. I'm having trouble connecting to my home network, so I always connect directly to the EP2's access point. The binding phrase is specified when flashing the firmware. |
I like the down-position steering wheel, but I don't like the drop-down style.
I actually wanted to rebuild the case itself, but that wasn't realistic, so I had no choice but to make a drop-down mod. https://cimg7.ibsrv.net/gimg/www.rct...c2a13edc36.jpg https://cimg8.ibsrv.net/gimg/www.rct...3b6faf0172.jpg I've lowered it a little too much, so I'll adjust it a little more. The more important problem is that it no longer fits in the MT12's transmitter bag. Does anyone know of a nifty bag that can store a drop-down MT12? |
Programming
Hey everyone so I just got my MT12 last week got it all set up I’m all of my cars I’m slowly figuring things out. But still so much to learn.
My question here does anyone know if you can set switches to adjust like the Throttle EPA? On my X-RAY XT2 I had to slow the throttle profile down quite a bit to keep traction at the race this weekend. But I went to far and didn’t have enough speed once racing. Obviously this is something to figure out in the Qualifying rounds or practice and not the main. But still just thinking if I could adjust that on the fly with like p1 or p2 dial like the multi switch on a Traxxas TQ would that. that would be rad. I’m sure it can be done I just don’t know how |
Originally Posted by milson7737
(Post 16096706)
Hey everyone so I just got my MT12 last week got it all set up I’m all of my cars I’m slowly figuring things out. But still so much to learn.
My question here does anyone know if you can set switches to adjust like the Throttle EPA? On my X-RAY XT2 I had to slow the throttle profile down quite a bit to keep traction at the race this weekend. But I went to far and didn’t have enough speed once racing. Obviously this is something to figure out in the Qualifying rounds or practice and not the main. But still just thinking if I could adjust that on the fly with like p1 or p2 dial like the multi switch on a Traxxas TQ would that. that would be rad. I’m sure it can be done I just don’t know how https://youtu.be/DcJnIJSHdgg?si=ps3FSUqpanFZnPuU |
The steering wheel has been adjusted to almost the best position.
I also want to make my own hand grip, but it is extremely difficult to create 3D CAD data for this. https://cimg4.ibsrv.net/gimg/www.rct...37e3fb1748.jpg https://cimg9.ibsrv.net/gimg/www.rct...c82b439a48.jpg |
I found a nice bag (h ttps://www.aliexpress.com/item/1005005602817829.html?pdp_npi=4%40dis%21JPY%21%EF% BF%A5%207%2C528%21%EF%BF%A5%202%2C484%21%21%21341. 96%21112.85%21%4021014a8d17156707908471656d6246%21 12000033716809052%21sh%21JP%21716785489%21&spm=a2g 0o.store_pc_aeChoiceSimplified.allitems_choice_200 5544669264.1005005602817829).
A modified MT12 can be fitted with simple cutting. If only the antenna is removed, it can be stored with the external module still attached. https://cimg0.ibsrv.net/gimg/www.rct...6df0023bda.jpg https://cimg1.ibsrv.net/gimg/www.rct...ba4efdd4d3.jpg |
Hi guys, I'm starting back on RC cars after 15 years more or less.
Should I choose the ELRS or 4IN1? Today I have none receiver, and I'm thinking to buy this radio due to price and features like selecting position of trigger, spring tension. Thank you! |
Originally Posted by Chof
(Post 16100235)
I found a nice bag (h ttps://www.aliexpress.com/item/1005005602817829.html?pdp_npi=4%40dis%21JPY%21%EF% BF%A5%207%2C528%21%EF%BF%A5%202%2C484%21%21%21341. 96%21112.85%21%4021014a8d17156707908471656d6246%21 12000033716809052%21sh%21JP%21716785489%21&spm=a2g 0o.store_pc_aeChoiceSimplified.allitems_choice_200 5544669264.1005005602817829).
A modified MT12 can be fitted with simple cutting. If only the antenna is removed, it can be stored with the external module still attached. https://cimg0.ibsrv.net/gimg/www.rct...6df0023bda.jpg https://cimg1.ibsrv.net/gimg/www.rct...ba4efdd4d3.jpg |
Originally Posted by Marcos.J
(Post 16100313)
what’s wrong with the case that comes with the radio ?
|
Originally Posted by Smarley
(Post 16100308)
Hi guys, I'm starting back on RC cars after 15 years more or less.
Should I choose the ELRS or 4IN1? Today I have none receiver, and I'm thinking to buy this radio due to price and features like selecting position of trigger, spring tension. Thank you! |
Originally Posted by Chof
(Post 16097004)
The steering wheel has been adjusted to almost the best position.
I also want to make my own hand grip, but it is extremely difficult to create 3D CAD data for this. https://cimg4.ibsrv.net/gimg/www.rct...37e3fb1748.jpg https://cimg9.ibsrv.net/gimg/www.rct...c82b439a48.jpg |
Originally Posted by Smarley
(Post 16100846)
The stearing wheel position is adjustable?
|
Originally Posted by gigaplex
(Post 16100849)
No, they modified it themselves
|
Originally Posted by Smarley
(Post 16100851)
Can you share a tutorial?
The modification is almost bolt-on, but it is necessary to extend the wiring of S1 and S2. This data includes: steering position mod Feather touch switch B trim5 mod https://cimg9.ibsrv.net/gimg/www.rct...b45da494f0.jpg |
Originally Posted by Chof
(Post 16100880)
Model data can be found here.
The modification is almost bolt-on, but it is necessary to extend the wiring of S1 and S2. This data includes: steering position mod Feather touch switch B trim5 mod https://cimg9.ibsrv.net/gimg/www.rct...b45da494f0.jpg Did you use some open source software like onshape to draw it? |
| All times are GMT -7. It is currently 12:43 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.