R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Onroad Nitro Engine Zone (https://www.rctech.net/forum/onroad-nitro-engine-zone-71/)
-   -   Novarossi engines thread (https://www.rctech.net/forum/onroad-nitro-engine-zone/29453-novarossi-engines-thread.html)

RĒce 12-29-2008 09:27 PM


Originally Posted by duku (Post 5210739)
Thanks i got the TS12 NS1..
btw which pipe do u recomend for this engine..is the kawahara pipe suitable for this engine...

I'm not sure about kawahara pipe. But mostly for nova engine, tune pipe recommended are nova 2630 & 2601.

PROVK 12-29-2008 09:39 PM

Is the 2052 pipe a 2 or 3 chamber pipe?
Novarossi site says 3 but I thought it was a 2, I think they changed it but left the number the same:weird:
How can a scrutineer tell what you are using?

Team Kamikaze 12-29-2008 09:46 PM

2052 is a 3 chamber pipe.

PROVK 12-29-2008 10:03 PM


Originally Posted by Team Kamikaze (Post 5224597)
2052 is a 3 chamber pipe.

I swear I saw it on the Nova site as 2 chamber a while back.

Thanks anyway

neltime64 12-29-2008 11:23 PM


Originally Posted by Team Kamikaze (Post 5224448)
3 x 12mm, as long as the thread itself is 12mm long (minimum).

Thanks Sam!


Nel

Nitro-Racer* 12-30-2008 03:01 AM

staikosn1
i have seen a couple of these engines at my track and they were ok. you would be suprised with the power they give, i expected less but they made good power:nod:. it should be a great back up engine:tire:

staikosn1 12-30-2008 08:52 AM

Thanks Nitro_Racer im thinking very serious to buy one of that engine these days....

ALG 12-30-2008 11:48 AM


Originally Posted by PROVK (Post 5224576)
Is the 2052 pipe a 2 or 3 chamber pipe?
Novarossi site says 3 but I thought it was a 2, I think they changed it but left the number the same:weird:
How can a scrutineer tell what you are using?

You can easily see if its a 2 o 3 chamber with a flashlight, put the light tru the singer and if you see the light at the entrance of the pipe is must be a 2 chamber and if you bearly or dont see the light is a 3 chamber.

Have fun

ALG

Roelof 12-30-2008 12:16 PM

All 20xx pipes are 3 chamber, nothing to get fuzzy about.

The 2052 does make a noise which reminds me back to the old TOP 053 pipe which had an awesome sound.

Timmo 12-30-2008 07:47 PM

If I go too lean on the low needle,can or will it do serious damage to the engine??How much damage can it cause??Will I have to replace anything??

NitroWD 12-30-2008 09:51 PM


Originally Posted by Timmo (Post 5228736)
If I go too lean on the low needle,can or will it do serious damage to the engine??How much damage can it cause??Will I have to replace anything??

lean on LSN won't really kill yr engine like the HSN, don't worry. ;)

Timmo 12-30-2008 10:45 PM


Originally Posted by NitroWD (Post 5229241)
lean on LSN won't really kill yr engine like the HSN, don't worry. ;)

Thank you..

seb1109 12-31-2008 06:36 AM

Hello,

has anyone compared the following pipes on a Nova 353 Tuned?

- 2601
- 2602
- 2620
- 2630

The track i'm racing is a large european style track.

http://www.wmc-ev.de/index.php?module=unsere_bahn

cheers
Sebastian

mrgsr 01-01-2009 03:02 AM

I use the 2630 and short manifold on a murnan mod 353 and its awesome. i also run on a large track (moorebank, sydney australia, home of the 2001 1:8 worlds)

i do believe i will have a fuel economy issue but ill test some more soon

ill be busy playing with my max xxl3

asw7576 01-01-2009 11:06 AM

Is N12 LS-- the new name for NSR12 S-- ?

I checked N12 LS-- and NSR12 S-- bore and stroke are the same :13.80mm x 14.04mm, and the engine cooling fins are the same too.


All times are GMT -7. It is currently 02:09 PM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.