Go Engine USA 2011 Thread
#181
Going on results down here, and on personal experiance, I would rate the GX-7R as the best buggy motor by far in the GX range (stock out of the box).
The 3 is nice and smooth, but does lack top end in stock form. The 5 is just a bit much in the buggy with it's massive bottom end punch. 7 Port has everything you need in the buggy. Plenty of bottom for any track, wicked mid range, and sizzling top end. I have yet to see any other stock motor (and a few modded ones) burn off the 7 Port in a straight line (the exception being the MG with it's own wicked top end).
Run the 7 Port with the Ascenency 4 shoe clutch using 4 x gold 1.0 springs - perfect. Plenty of power off the mark, but is smooth and controlled. Gives you a big smooth power rush from start to finish
.
Will be interesting to see what the power band of the new GXII is like compared to the 7 Port.
The 3 is nice and smooth, but does lack top end in stock form. The 5 is just a bit much in the buggy with it's massive bottom end punch. 7 Port has everything you need in the buggy. Plenty of bottom for any track, wicked mid range, and sizzling top end. I have yet to see any other stock motor (and a few modded ones) burn off the 7 Port in a straight line (the exception being the MG with it's own wicked top end).
Run the 7 Port with the Ascenency 4 shoe clutch using 4 x gold 1.0 springs - perfect. Plenty of power off the mark, but is smooth and controlled. Gives you a big smooth power rush from start to finish
.Will be interesting to see what the power band of the new GXII is like compared to the 7 Port.
Last edited by grizz1; 01-13-2011 at 02:09 PM.
#182
Quote:
Originally Posted by Redvet79 View Post
Matt i do get my parts from you.
It,s just he is always saying the site is going to be updated with this and that and it doesn't happen. I think that makes for bad business ethics. If he is not going to maintain the site then he should let someone else do it. It's not that hard to do, Importer or not he has the site. I also have the PDFs but i know other people that don't.
I go to the NZ. site to get my info.
o1/12/2011
it is being done as we speek....
Gx PDF's will be on the Go-Engine-Usa.com site tonight aswell
Robert Schneider~CLAPPED OUT RACING!
Same old song and dance
Just left the site
Originally Posted by Redvet79 View Post
Matt i do get my parts from you.
It,s just he is always saying the site is going to be updated with this and that and it doesn't happen. I think that makes for bad business ethics. If he is not going to maintain the site then he should let someone else do it. It's not that hard to do, Importer or not he has the site. I also have the PDFs but i know other people that don't.
I go to the NZ. site to get my info.
o1/12/2011
it is being done as we speek....
Gx PDF's will be on the Go-Engine-Usa.com site tonight aswell
Robert Schneider~CLAPPED OUT RACING!
Same old song and dance
Just left the site
#183
Quote:
Originally Posted by Redvet79 View Post
Matt i do get my parts from you.
It,s just he is always saying the site is going to be updated with this and that and it doesn't happen. I think that makes for bad business ethics. If he is not going to maintain the site then he should let someone else do it. It's not that hard to do, Importer or not he has the site. I also have the PDFs but i know other people that don't.
I go to the NZ. site to get my info.
o1/12/2011
it is being done as we speek....
Gx PDF's will be on the Go-Engine-Usa.com site tonight aswell
Robert Schneider~CLAPPED OUT RACING!
Same old song and dance
Just left the site
Originally Posted by Redvet79 View Post
Matt i do get my parts from you.
It,s just he is always saying the site is going to be updated with this and that and it doesn't happen. I think that makes for bad business ethics. If he is not going to maintain the site then he should let someone else do it. It's not that hard to do, Importer or not he has the site. I also have the PDFs but i know other people that don't.
I go to the NZ. site to get my info.
o1/12/2011
it is being done as we speek....
Gx PDF's will be on the Go-Engine-Usa.com site tonight aswell
Robert Schneider~CLAPPED OUT RACING!
Same old song and dance
Just left the site
you have to remember, people do have REAL jobs aswell
#184
Quote:
Originally Posted by Redvet79 View Post
Matt i do get my parts from you.
It,s just he is always saying the site is going to be updated with this and that and it doesn't happen. I think that makes for bad business ethics. If he is not going to maintain the site then he should let someone else do it. It's not that hard to do, Importer or not he has the site. I also have the PDFs but i know other people that don't.
I go to the NZ. site to get my info.
o1/12/2011
it is being done as we speek....
Gx PDF's will be on the Go-Engine-Usa.com site tonight aswell
Robert Schneider~CLAPPED OUT RACING!
Same old song and dance
Just left the site
Originally Posted by Redvet79 View Post
Matt i do get my parts from you.
It,s just he is always saying the site is going to be updated with this and that and it doesn't happen. I think that makes for bad business ethics. If he is not going to maintain the site then he should let someone else do it. It's not that hard to do, Importer or not he has the site. I also have the PDFs but i know other people that don't.
I go to the NZ. site to get my info.
o1/12/2011
it is being done as we speek....
Gx PDF's will be on the Go-Engine-Usa.com site tonight aswell
Robert Schneider~CLAPPED OUT RACING!
Same old song and dance
Just left the site
I'm working on that and the starter box exploded view, and I'm not going to post something until it's right. I'm sorry if this is not fast enough for you, but you indicated that you already have this information, and my priority has been preparing the sales team, dealers, team drivers, inventory, taxes, and the new GXII. The web site is a distant last right now. Moto has this information and has already posted it posted as well. How many engine distributors (not manufacturers) have this information posted on their site? You can always go to the manufacturers' site and get this information.
#185
also, unless it comes from me, dont hold me to it. I said I would update the site this past weekend, and parts of it are updated, but not finished. Hence, they are not published. the site is not a simple html post, it's a data-driven content management system. There are some other things that I've got planned for later this year, and i have to setup the framework now.
Last edited by Ruune; 01-13-2011 at 05:41 PM.
#186
Joined: Dec 2009
Posts: 7,916
From: northern michigan
i have emailed and pm'd many times, contact trey at premierehobbies.com, he is interested in selling GO products. 704-491-2484, emails dint seem to work so thought i would post here. no excuses now....LOL
also want to thank trey and moto for the banner and stickers and fugly hat...lol, super speedy shipping!!! thanks again!!! Mike

also want to thank trey and moto for the banner and stickers and fugly hat...lol, super speedy shipping!!! thanks again!!! Mike
#187
parts listings for GX engines and Go Box starter boxes are posted at www.go-engine-usa.com. Formatting isnt perfect, but since there is such a demand I figured I'd go ahead and post anyway.
Also, the taiwan site is down for a rebuild. I'll let you guys know when they're expecting it to be back up.
Inferno... premiere should expect to hear from one of us Friday or Sat.
Also, the taiwan site is down for a rebuild. I'll let you guys know when they're expecting it to be back up.
Inferno... premiere should expect to hear from one of us Friday or Sat.
#189
parts listings for GX engines and Go Box starter boxes are posted at www.go-engine-usa.com. Formatting isnt perfect, but since there is such a demand I figured I'd go ahead and post anyway.
Also, the taiwan site is down for a rebuild. I'll let you guys know when they're expecting it to be back up.
Inferno... premiere should expect to hear from one of us Friday or Sat.
Also, the taiwan site is down for a rebuild. I'll let you guys know when they're expecting it to be back up.
Inferno... premiere should expect to hear from one of us Friday or Sat.
#191
Taiwan isn't letting anything out of the bag until they are ready on this one.
I am getting hounded for pricing etc here as well. From discussions with Simon at GO, it sounds like the pricing will be very competitive with the GX Series (maybe not including the spare rod though), but nothing definite yet on the pricing or the rod inclusion. Should be hearing something any day now.
Got my order all ready to go - just need to hit the send button
#193
Ha - everyone is waiting for those Matt. I've got an empty web page just sitting there waiting for some pics, info and prices.
Taiwan isn't letting anything out of the bag until they are ready on this one.
I am getting hounded for pricing etc here as well. From discussions with Simon at GO, it sounds like the pricing will be very competitive with the GX Series (maybe not including the spare rod though), but nothing definite yet on the pricing or the rod inclusion. Should be hearing something any day now.
Got my order all ready to go - just need to hit the send button
Taiwan isn't letting anything out of the bag until they are ready on this one.
I am getting hounded for pricing etc here as well. From discussions with Simon at GO, it sounds like the pricing will be very competitive with the GX Series (maybe not including the spare rod though), but nothing definite yet on the pricing or the rod inclusion. Should be hearing something any day now.
Got my order all ready to go - just need to hit the send button

#195
you know it...Ryans a cool guy....Go Engines and Team Losi....Pshhh you cant beat that combo
Also Matt "PUDDIN" Sistrunk also has signed to Team Losi
....next announcement will be Rob Schneider Signs to Team Losi

...i wish

Also Matt "PUDDIN" Sistrunk also has signed to Team Losi
....next announcement will be Rob Schneider Signs to Team Losi

...i wish



1Likes