![]() |
THANKS FOR ALL THE GREAT INFO GUYS! I HOPE TO BREAK IT IN THIS WEEKEND ALL LET YOU GUYS KNOW HOW IT TURNS OUT!
|
be patient and you will be rewarded...do not rush it.
|
hey guys! Quick questions here. What would be the best Nova engine for a truggy? (8ight-t 2.0).
The plus 4, Toro or FMS... hehe at this point im really confuse, ive been reading a lot on all 3 of them and they seems all good but one of these must be better for a truggy. So again which one would be the best all around engine (lots of pwr and good run time). |
Originally Posted by Zuma
(Post 6757141)
hey guys! Quick questions here. What would be the best Nova engine for a truggy? (8ight-t 2.0).
The plus 4, Toro or FMS... hehe at this point im really confuse, ive been reading a lot on all 3 of them and they seems all good but one of these must be better for a truggy. So again which one would be the best all around engine (lots of pwr and good run time). hope this helps, monty |
That was a fast answer Ty Houston :nod:
So how much run time will I get with the FMS? Im not a pro driver so my driving is not exactly very smooth... I tend to be heavy on the throttle from time to time. Oh and would a 9853/41021 pipe be a good combo? |
Originally Posted by Zuma
(Post 6757198)
That was a fast answer Ty Houston :nod:
So how much run time will I get with the FMS? Im not a pro driver so my driving is not exactly very smooth... I tend to be heavy on the throttle from time to time. Oh and would a 9853/41021 pipe be a good combo? i have seen 13 min. out of the fms in truggy with a light throttle finger and as little as 7 1/2 min with very heavy finger . runtimes can vary dramatically with your fingering of the throttle :nod: |
Wasnt the SBK-01 a Nova based motor. I got one along time ago when I was Racing for Ron Paris and man it was the bestengine I had ever ran!!!
The owners of Action RC dug big pot wholes infront of a huge Double Double because I was quading it at the 2004 Nats. I was the only one doing it LOL so they came up with some lame excuse to put the pot holes in. LMAO |
Originally Posted by janderson78
(Post 6757346)
Wasnt the SBK-01 a Nova based motor. I got one along time ago when I was Racing for Ron Paris and man it was the bestengine I had ever ran!!!
The owners of Action RC dug big pot wholes infront of a huge Double Double because I was quading it at the 2004 Nats. I was the only one doing it LOL so they came up with some lame excuse to put the pot holes in. LMAO big bore short stroke :tire: |
Originally Posted by houston
(Post 6757352)
big bore short stroke :tire: |
Originally Posted by rpm1968
(Post 6758060)
sounds like somebody I know!:lol:
whats up yo ? |
there are only 2 pipes i use on my novarossi engines..9886, or 053.
has any one tried a sirio 2013? im usually on large smooth flowing tracks and like to have my engines stretch there leggs:D |
2013 will give your engine the lightswitch effect, I tried one and it made mucho power, but my lap times dropped as the power was just too much........thats a nasty pipe for sure.
|
2013 works pretty good on most nova engines and makes alot o' power !!! and very very loud!!! :nod:
|
yeah, the pipe has a real raspy tone, its a cool sounding pipe for sure, you know a 2013 when you hear it........the pipe did make mad power, probably be great in a truggy. Hmmmm..........plus4C, Hitec servos, mp9, should be sweet setup :)
|
Originally Posted by Trevor Williams
(Post 6761379)
yeah, the pipe has a real raspy tone, its a cool sounding pipe for sure, you know a 2013 when you hear it........the pipe did make mad power, probably be great in a truggy. Hmmmm..........plus4C, Hitec servos, mp9, should be sweet setup :)
|
| All times are GMT -7. It is currently 12:15 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.