Breaking in the Bonito as I type...Engine fired right up after a lil heat.

Sorry bud i didnt see this post.

On the Btt in my Buggy im runnin a 41021/9901 for the header and pipe with a 6.5 mm venturi, a lot of people use the 6mm for better fuel mileage but i like how the 6.5mm feels. for the plug i use a C6TGC and byron Fuels 30/9. Im using the losi 4 shoe clutch with 2 alum and 2 comp with 2 green and 2 black springs with a steel flywheel My temps are about 240 and im getting about 10.5 min on the run time , i can get more with a smaller venturi and a smoother throttle finger. This engine is super smooth, best buggy engine out there IMO.

On the Bonito in my truggy im running the 41021/9853 combo with 7mm Venturi and C6 Plug,same fuel. Also using the losi 4 shoe clutch with 2 alum 2 comp with 2 gold and 2 green springs with alum flywheel. Temps are about 260 but its still tight and its breaking in still. i havent been able to really test runtimes and the engine is slowly breaking in and also ive been to a different track every time i have ran this engine but so far im getting aprox 10 min.

haha, what engine was he running. I would think nova since he has a serpent deal?

I ended up going with the 2096/21 combo with my Bonito. I hope this is the ticket:nod::nod::nod:

oh ya they were novarossi engines alright :nod:

p5xlt and plus 4

should work pretty good for ya

like mark @ powerhouse said , give the 9901ss/41021 or 41020 a try on the 367/toro nero/boneytoe a try , you will like it also

Losi Racer,

thank you for the info. :nod:

9901ss/41020 FTW!

WILL A TURBO BUTTON FROM A TORO NERO FIT ON A PLUS4?

No

28002 for non team and 28028 for team and btt/s

What makes them so special you seem excited about these ? Or am I reading to much into it

any time bud

Too much kittrell ;)

Ok :) . You coming for the nitro challenge warm up race ?

Probably not the warmup but maybe , dates?

Definitely NC though

Next weekend practice 4th qual mains on 5th