yeah the new head design is nice , plus i think it will stay cleaner longer too, will see.

Is the plug in the head supposed to be a little loose until it gets about halfway? I am talking about werks plugs in a werks head. It tightens up at the towards the end

Yes, they should thread in with little to no resistance until they are almost snug. If they feel tight or take force to turn right off of the bat stop because you might be cross threading it!

oh no, i would never crossthread. Was just curious because the plug seems to have some play before it bottoms out.

Man you would have to try pretty hard to cross thread a glow plug

thans ron

Slightly off topic Ron but any idea when A Main will get some more Werks 30% in, down to a little over a gallon and startin to get nervous, thanks.

You'd be surprised it's actualy easier than you think, I've done it before lol:blush:

There is a shipment actualy en-route to them now! I would think that they should be getting it in the next 3-4 days. So if you don't already have an order in place I'd just stick a backorder inthe system and it should be en-route to you in 4-5 days. Hope this helps!

Ron you have a P.M.

plug
 

which werks plug do i use for the werks .21 engine (offroad)???
im running 25 percent tornado fuel .. il be buying plug in bulk as its not available in our country .. thank u .. sry if its been discusd

Does anyone know is the orion 2013 is the same as the werks racing? I already have a 2013 from orion so I really dont want to spend another chunk of money on a pipe if I dont have to.

Thanks

what are you guys cleaning your pipe with. Is there something that you can soak it in to get all the burnt stuff off? Thanks.....

The only thing I haven't tried is soaking it in antifreeze in a crockpot -- but I hear that works well. Easy off and wire brushes will just destroy your finish.

The best thing you can do is not run byrons fuel. That stuff leaves a residue that is basically perm, especially if you run 11% lube -- greif.

Wayne

2013 pipe is the same as the orion,sirio, and werks.

I use the soft pink soap brillo pad. This brillo wont scratch or take the shine from the pipe.

http://www.google.com/imgres?imgurl=...w=1280&bih=705

yes antifreeze and a crock pot from the dollar store... soak it for 24 hours
and youll be good to go. make sure you keep the lid on it and do it out side.
also watch for pets when dumping it out...:D
you can reuse the antifreeze 2-3 times also..pipes look like new when finished