Rayaracing sleeve resizing and tooling
#181
Tech Fanatic
iTrader: (23)
Joined: Nov 2002
Posts: 833
From: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
Your order was serviced and return shipped USPS International Priority 4-22-10. Orders recieved yesturday and this morning will go out first thing Monday morning guys

RayAracing
#183
Yes Russ. Arrived yesturday and serviced, and return shipping USPS Priority mail this morning. Plus 4 came out nice 
Orders from LasVegas , England, and the UK going out too. Nothing remains on the bench untill USPS and Fedexx, and UPS drop off this afternoon
Thanks Guys!!!
RayAracing

Orders from LasVegas , England, and the UK going out too. Nothing remains on the bench untill USPS and Fedexx, and UPS drop off this afternoon

Thanks Guys!!!
RayAracing
#185
Tech Fanatic
iTrader: (23)
Joined: Nov 2002
Posts: 833
From: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
Thank You, Russ G.
Your set just needed a little freshen up....total seal condition was not as bad as most. Working from the top (TDC) area down, your sets sealing capabilities weakest at points mid and above porting window, that which sleeve alloys were reconstructed only a few tenths of a thousandth one inch (0.00025") to re establish your sets new improved fit = MATCHING.
Glade you like the results the procedure that would not have happened without racers support. These past 9 years has givin me quit a bit to be thankfull for. Enough said
I hope.. .donrod, I appreciate the repeat business.
Packages received yesterday went out USPS today guys.
RayAracing
#187
Tech Fanatic
iTrader: (23)
Joined: Nov 2002
Posts: 833
From: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
You must be doing some racing there in NC with serviced P5XLT delivered you around April 15th. "Resized 4+1/2 tenths"? Please let us know how she is running after the 4th reconditioned-resized gallon mark. My experience with the Italian based engine models I guess has been with results you could write home to moma about ? hee hee
Packages arrived here yesturday are serviced + going out now durring my lunch break.
RayAracing
#188
Donnie O ?
You must be doing some racing there in NC with serviced P5XLT delivered you around April 15th. "Resized 4+1/2 tenths"? Please let us know how she is running after the 4th reconditioned-resized gallon mark. My experience with the Italian based engine models I guess has been with results you could write home to moma about ? hee hee
Packages arrived here yesturday are serviced + going out now durring my lunch break.
RayAracing
You must be doing some racing there in NC with serviced P5XLT delivered you around April 15th. "Resized 4+1/2 tenths"? Please let us know how she is running after the 4th reconditioned-resized gallon mark. My experience with the Italian based engine models I guess has been with results you could write home to moma about ? hee hee
Packages arrived here yesturday are serviced + going out now durring my lunch break.
RayAracing
#189
Tech Fanatic
iTrader: (23)
Joined: Nov 2002
Posts: 833
From: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
Packages recieved Thursday and Friday serviced + return shipped USPS half hour ago. Monday and Tuesday deliverys is calculated. Thursday was my race day so worked long and hard yesturday
Thanks guys
Today is a good day to call me with any questions....tomorrow I will race again if weather permits it.
RayAracing
Thanks guys Today is a good day to call me with any questions....tomorrow I will race again if weather permits it.
RayAracing
#190
Thanks again Ray for fixing my B5, it was a sad 1/2gallon mark my comrod ended up breaking and for sure killed that thing. Should have let it break in longer, went race pase and temps on tank 6 and she was flying till it poped and stoped. Thanks again and dont worry( it was my fault ) I will still send u my motors when the time comes and I would recommend your service to all.
#191
Tech Fanatic
iTrader: (23)
Joined: Nov 2002
Posts: 833
From: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
Landon,
Thanks for the heads up. Very helpfull + huge part of getting to know the engine
Charactoristics with related my related resizing process,with bearing wear factors'.That engine model cranks some power, no doubt.Light or Light-medium tightness for all B5's now.ship the complete engine to me if you wish. I will pay the shipping. I would like to inspect Present conditions. RayAracing
Thanks for the heads up. Very helpfull + huge part of getting to know the engine
Charactoristics with related my related resizing process,with bearing wear factors'.That engine model cranks some power, no doubt.Light or Light-medium tightness for all B5's now.ship the complete engine to me if you wish. I will pay the shipping. I would like to inspect Present conditions. RayAracing
Thanks again Ray for fixing my B5, it was a sad 1/2gallon mark my comrod ended up breaking and for sure killed that thing. Should have let it break in longer, went race pase and temps on tank 6 and she was flying till it poped and stoped. Thanks again and dont worry( it was my fault ) I will still send u my motors when the time comes and I would recommend your service to all.
#192
Tech Fanatic
iTrader: (23)
Joined: Nov 2002
Posts: 833
From: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
Guys,
Please use the reconditioning-resizing order form http://www.rayaracing.com/resizebuy3.htm listed on my website. I must have a CLEAR return shipping address with email/phone contact info. This simple 3 step process has worked well for the past "nine" years.
Thank You,
RayAracing
Step One: Put your piston/sleeve sets and payment in a padded envelope. If you are paying via paypal, our paypal address is [email protected]. Money orders payable to Ray Aronica. NO PERSONAL CHECKS please. Cash is OK. BE SURE YOUR RETURN SHIPPING AND EMAIL ADDRESSES ARE CORRECT!
Step Two: Address your package to:
RayAracing
C/O Ray Aronica
73 North Lane
Orchard Park, NY 14127
Step Three: Click the button below to submit this form to us so that we know to expect something from you. This allows us to minimize our turnaround time and to better track your order. After that, simply mail your package to us. Our turnaround time is 1-2 days. Thanks for your business!
paypal
We accept Paypal!
Please use the reconditioning-resizing order form http://www.rayaracing.com/resizebuy3.htm listed on my website. I must have a CLEAR return shipping address with email/phone contact info. This simple 3 step process has worked well for the past "nine" years.
Thank You,
RayAracing
Step One: Put your piston/sleeve sets and payment in a padded envelope. If you are paying via paypal, our paypal address is [email protected]. Money orders payable to Ray Aronica. NO PERSONAL CHECKS please. Cash is OK. BE SURE YOUR RETURN SHIPPING AND EMAIL ADDRESSES ARE CORRECT!
Step Two: Address your package to:
RayAracing
C/O Ray Aronica
73 North Lane
Orchard Park, NY 14127
Step Three: Click the button below to submit this form to us so that we know to expect something from you. This allows us to minimize our turnaround time and to better track your order. After that, simply mail your package to us. Our turnaround time is 1-2 days. Thanks for your business!
paypal
We accept Paypal!
#194
Tech Fanatic
iTrader: (23)
Joined: Nov 2002
Posts: 833
From: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
That send button is the bomb....Now I got a printed copy
I'm good a printed copy inclosed in package with piston+sleeve sets. Iether way keeps things simple there. Again ,Thanks! Orders recieved Saturday shipped this morning, and todays arrivals ship tomorrow.
#195
Tech Fanatic
iTrader: (23)
Joined: Nov 2002
Posts: 833
From: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
Jeff, Joselito,Jake, Jarodd arrived serviced and return shipped today.
Now tomorrow if all packages are with first name starting with "K" i'll worry. LOL
Thanks guys
RayAracing
Now tomorrow if all packages are with first name starting with "K" i'll worry. LOLThanks guys
RayAracing



15Likes