R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Offroad Nitro Engine Forum (https://www.rctech.net/forum/offroad-nitro-engine-forum-157/)
-   -   Houstons Engine Service H.E.S. (https://www.rctech.net/forum/offroad-nitro-engine-forum/285444-houstons-engine-service-h-e-s.html)

houston 05-01-2013 12:34 PM


Originally Posted by mayhem04 (Post 12106162)
What time does you flight get in tomorrow brotha?

Marks picking me up at 735

beidle99 05-01-2013 04:26 PM


Originally Posted by jeromerc (Post 12104808)
Monty, I have some exceed after run oil is it safe to put in the engine? I am only going to use the lightning when I am showing people it or when racing and actually getting my setups for the race. I have two newer engines and two older ones to use when I just go to the track and practice, so it might sit for a month before I get it out again, if the after run isn't good what would you recommend doing to keep it fresh?

Jerome,
if its going to be sitting for a month or so, you could just put a few drops of castor oil in it and turn it over by hand a few times to make sure its nice a coated. Its safe for the filled cranks.

houston 05-02-2013 02:57 PM

Portland , or to phoenix , az down , now on to albuquerque then houston ,tx

Then houston will be in houston :lol:

kgombe 05-02-2013 04:08 PM

good luck bro.. have fun

houston 05-02-2013 04:13 PM


Originally Posted by kgombe (Post 12110625)
good luck bro.. have fun

Just landed in albequerque

kgombe 05-02-2013 05:09 PM


Originally Posted by houston (Post 12110644)
Just landed in albequerque

:eek:...

houston 05-02-2013 07:02 PM

Houstons in Houston! Lol

jeromerc 05-02-2013 07:23 PM

Have fun Monty!

colby233 05-02-2013 10:02 PM

Sparkplug.:lol:

beidle99 05-03-2013 05:17 AM

Good luck Monty

houston 05-03-2013 07:44 PM

Gulf coast raceway rocks !

jeromerc 05-05-2013 06:02 PM

Monty, I put the OS back in Sunday and man it was night and day, the X3LFM has WAAAAAAAAAYYYYYYYYY more bottom end power but it was still silky smooth. I could not believe the difference in bottom end power. One of the jumps I was stopped on the run up with the X3 and I cleared it no problems, no way would the OS do the same. Top speed on the two is about the same maybe a tiny bit less on the X3 but it might also be I just let off a bit sooner for the turns on the straight, but definitely nothing to run home and talk about. Probably going to take this month off and focus on my college math course, but if you get a chance can you email me anything I need to look at for the question I sent in the PM. No races this month but there is a truggy race in June, just wish I had a X7FM for that as well :)

Thanks again for the awesome engine and excellent customer service!!

TX_Punisher 05-05-2013 06:59 PM


Originally Posted by houston (Post 12114749)
Gulf coast raceway rocks !

It's a nice facility.

Where were you pitted? I didn't even see you. :weird:

houston 05-06-2013 04:06 AM


Originally Posted by TX_Punisher (Post 12120124)
It's a nice facility.

Where were you pitted? I didn't even see you. :weird:

I was pitted in the trailer with mark morrow and thomas wells

Leaving houston now , sitting at the airport waiting to board plane atm

Facility rocks !

World class all the way

Adam Webernick 05-06-2013 07:43 AM

Novarossi engines?
 
I just bought a mbx6 and I want to put a novarossi in it but I know nothing of nitros... So what's a good engine for a 1/8 buggy that novarossi makes?


All times are GMT -7. It is currently 03:10 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.