R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Offroad Nitro Engine Forum (https://www.rctech.net/forum/offroad-nitro-engine-forum-157/)
-   -   Houstons Engine Service H.E.S. (https://www.rctech.net/forum/offroad-nitro-engine-forum/285444-houstons-engine-service-h-e-s.html)

kgombe 06-13-2011 07:14 AM


Originally Posted by houston (Post 9248329)
Yes I can :lol:

I will post a more in depth review later today, working my day job atm :D

LOL.... tease.. by the way... my X7 HLX and my FMS team performed flawlessly ... i had a guy who was pitting with me that had issues with his motor so i pulled the FMS out and re-shimmed it for 20% because that is what he was running and he absolutely loved it.. so i had to run the my back up stock FMS.... i ran it with the 9901 and 021 header... and man that thing ran great..

all in all good weekend third in buggy and truggy.. had 3 flame outs in truggy due to weather change and i did not have time to tune it... climbed back up the order to within 3 seconds of 2nd place.. and he just crossed the line before me to get that extra lap...:flaming: :D

Trevor Williams 06-13-2011 07:19 AM

lol

DezSlash 06-13-2011 08:44 AM

Hey Monty! PM sent

houston 06-13-2011 07:02 PM

back at ya brotha

Chris Reilly 06-13-2011 07:44 PM


Originally Posted by houston (Post 9248329)
Yes I can :lol:

I will post a more in depth review later today, working my day job atm :D


So during the day you are a ATM? :lol:

I will take a 5-10 mil please. Got some travel plans.:ha:

houston 06-13-2011 08:07 PM

funny chris ;)


the 2096ss is awesome , not only did it have 9886 type top with 9853 type low end power , it is ridiculous the runtimes i was seeing ,

p5xlt houston tuned in an mbx6t , fioroni turbo sliding clutch , 7mm , odonnell 97t , 70° ambient , med. humidity, engine 230° , byrons race 3000 (which is 11% oil) on a pretty big track i ran the truck myself at race pace fro 12 min. 30 sec. and there was still a decent amount of fuel in the tank , timed this with radio timer at fill up and then nailed it out of the pits , i wrecked one time during the timing run for about 7-8 sec.

so you see why i am thinking this is my new fav pipe? :nod:

DezSlash 06-13-2011 08:09 PM

Nice review!!

houston 06-13-2011 09:09 PM

very happy with this pipeset:nod:

kgombe 06-13-2011 09:28 PM

ok... do you have any for sale... :-)

houston 06-13-2011 10:50 PM


Originally Posted by kgombe (Post 9252206)
ok... do you have any for sale... :-)

i have one left and need to order more


pricing is a bit ridiculous at 85$ /pipe

kgombe 06-14-2011 03:57 AM


Originally Posted by houston (Post 9252511)
i have one left and need to order more


pricing is a bit ridiculous at 85$ /pipe

sent you a PM

camocowboy 06-14-2011 11:03 AM

Houston tuned X7
 
Just got back from the roar region 10 champs. X7 was great all weekend. Took second in truck. Motor was also good at nats the weekend before. If your looking for a truck motor call monte about this one

Hobbs263 06-14-2011 02:53 PM

Hey Monty, what header are you running with the 2096ss? How do you think it would work with a 21-4?

houston 06-14-2011 07:10 PM


Originally Posted by camocowboy (Post 9254714)
Just got back from the roar region 10 champs. X7 was great all weekend. Took second in truck. Motor was also good at nats the weekend before. If your looking for a truck motor call monte about this one

awesome Greg!!!

hope it lasts you long time and keeps you happy brotha!!


lmk if you need anything :)

houston 06-14-2011 07:11 PM


Originally Posted by Hobbs263 (Post 9255653)
Hey Monty, what header are you running with the 2096ss? How do you think it would work with a 21-4?

it works killer on a p5xlt , i will see how it works on a plus 4 but i am 99.99% positive it will be just as good :nod:


2096ss/41029 (mugen truck)


All times are GMT -7. It is currently 02:24 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.