R/C Tech Forums
Page 285 of 595
« First
185
235
275
283
284
285
286
287
295
335
385
Last »
Show 40 post(s) from this thread on one page

R/C Tech Forums (https://www.rctech.net/forum/)
-   Offroad Nitro Engine Forum (https://www.rctech.net/forum/offroad-nitro-engine-forum-157/)
-   -   Houstons Engine Service H.E.S. (https://www.rctech.net/forum/offroad-nitro-engine-forum/285444-houstons-engine-service-h-e-s.html)

Dave De Voe 12-06-2010 07:38 PM
Originally Posted by Chad Millikan (Post 8304788)
Carpet? The only carpet in So Cal is in my house. Let me guess you have wood jumps too. What, are you going Euro on us. :eek::o:smile::cool:
no just rains ALOT in Oregon. pan cars don't jump very well.
I still miss the smell of nitro in the morn. and apples;) at nite:D

Chad Millikan 12-06-2010 10:12 PM
Whats opinion on marvel mystery oil for an ARO. But I am pretty sure your flavor of choice is RBMods. Just looking for something a little more available

houston 12-07-2010 06:13 AM
Originally Posted by Chad Millikan (Post 8308205)
Whats opinion on marvel mystery oil for an ARO. But I am pretty sure your flavor of choice is RBMods. Just looking for something a little more available
just make sure u don't have a silicone filled crank

dr devious 12-07-2010 06:48 PM
RE LRP21X
 
Does anyone know the front and rear bearing sizes for the lrp 21x
Mine need replacing Cheers

Chad Millikan 12-07-2010 07:35 PM
On Boca Bearings Web site under the cross refrence. they have just about every engine in there, and you can steal the size from there:batman:

houston 12-07-2010 09:56 PM
Originally Posted by dr devious (Post 8312258)
Does anyone know the front and rear bearing sizes for the lrp 21x
Mine need replacing Cheers
About 99.9% sure it would be 7x19x6mm as are most all nitro .21 and .28 engines

dr devious 12-08-2010 12:15 AM
lrp
 
No luck with boca guys

hambone 12-08-2010 12:38 AM
Originally Posted by dr devious (Post 8313441)
No luck with boca guys
LRP is a Picco Evo engine. They take the same size as a v spec. Find the picco for sure, but it should be 7x19x6, 14x25.4x6.

dr devious 12-08-2010 01:49 AM
Originally Posted by hambone (Post 8313481)
LRP is a Picco Evo engine. They take the same size as a v spec. Find the picco for sure, but it should be 7x19x6, 14x25.4x6.
I think your on the money Thanks

houston 12-08-2010 08:02 AM
Originally Posted by hambone (Post 8313481)
LRP is a Picco Evo engine. They take the same size as a v spec. Find the picco for sure, but it should be 7x19x6, 14x25.4x6.
actually i think those engines are 13x25x6mm , dont quote me on that but i remember working on one for a local and that size seems to come to mind .

dr devious 12-08-2010 10:46 AM
Originally Posted by houston (Post 8314518)
actually i think those engines are 13x25x6mm , dont quote me on that but i remember working on one for a local and that size seems to come to mind .

Seems the p7 evo series have 14x25.4x6 but some of the earlier engines have that size houston
Thanks for the help

houston 12-08-2010 10:57 AM
Originally Posted by dr devious (Post 8315149)
Seems the p7 evo series have 14x25.4x6 but some of the earlier engines have that size houston
Thanks for the help
measure the outer diameter of the crank , if its 13mm its a 13x25x6mm , if its 14mm its a 14x25.4x6mm , if its a 14.2mm its a 14.2x25.3mm

that should help ;)

Trevor Williams 12-09-2010 07:29 AM
brrrraaaaaap!

houston 12-09-2010 03:43 PM
Originally Posted by Trevor Williams (Post 8319201)
brrrraaaaaap!
Welcome to team HES TW :D

Trevor Williams 12-09-2010 05:02 PM
thanks bro.....you always took great care of me in keeping me going on the track!!!

I greatly look forward to using HES products for my 2011 race season!!!


All times are GMT -7. It is currently 11:18 PM.
Page 285 of 595
« First
185
235
275
283
284
285
286
287
295
335
385
Last »
Show 40 post(s) from this thread on one page

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.