i am recommending for buggy - plus4 (any version thereof ;)) 9901ss/41005 , 6-6.5mm restrictor , 30% race 3000 byrons gen 2 , if you feel you need more torque use 41021 . for you with the mugen use 41029 . just let me know what you may need :cool:

p4 plug? u silly boy!!!


i have never once claimed OS plugs are not made with quality , that they are :nod:

Thanks for your advice Houston.
Will be placing an order with you soon.
i can't get Byrons race fuel so will have to give it a go with my current fuel.
So you recommend 30% fuel to 25% ?

ya , if you guys are limited by some sanction at 25% then it is what it is .

el' package arrived 2day..thanx man


tommy

Whats been going on buddy. Hows life treating you. I got everything retuned and ready to rock and roll. Going on vac this weekend and then next weekend its back to racing.

lifes good, work sucks !! :lol:

I wish I could find a career in R/C :D

Hope everybody is doing good

Happy motorin',
Monty

PM
 

Monty,

I sent you a PM with a question.

Thanks, Nick

back at ya jones:)
ORCNT rd#2 Bend,OR -high desert rc raceway!!

killer race !! thanks to the high desert rc crew for putting a killer track up for us to play on !!!

i won buggy and truggy , good times good times !!


thanks rev, turtle , johnny knobs and all who made the facility what it was , you guys rock!!!


TRACK WAS HUUUUGGGE!!

whats the minimum head shims u can run with a plus 4 on 25% i know a alpha team driver who recently just found out that the alpha can run with no shims hes testing it and said the motor has gain plenty grunt

can i do a squish test with lead

you can do the squish test if you would like but not really necessary with the nova engines as the machining on the blocks and head buttons are pretty consistent . you can run down to .65mm - .70mm for 25%

nova engines come with twox.30mm aluminum shims and one .20mm copper in most all the engines now . they have been shimmed for 30% from the factory for american market on most all engines produced now .

hope this helps


alpha engines head buttons are probably machined a little different i would imagine :tire:

thankyou
so am i right in saying that a nova p4 with no shims the piston will hit the head,
and are u saying that the US nova motors come with the extrra shim installed and u dont get the exta in the box

why carnt u run 30% with .6 .7 clearance will it detonate, or u can u just carnt run the higher temps


gee the alpha must have some clearance out of the box

Whats the plus of running a p5 crank in a 3 port NR?

Hi Monty,
Do you like the 2084 and what are the characteristics of it?

Thanks

Congrats
 

On the Wins Monty. I just wanted to thank you for recommending the TKO ceramic bearings for my p5. After they broke in, a little tight at first, my engine screams. I can't believe the bearings makes so much difference in the power of an engine. Thanks again man....