I took the head off my p5 and it had 2 thick alluminum shims and one thin brass shim, that seems like a lot of shims. I took out the brass one to lower it a bit, is that ok. Any advice.....

Monty, when using the button for the turbo plug, do I leave the brass shim that is used with the regular button? This motor is a +4, and is brand new. I will be breaking it in this weekend as you have described. Thanks.

Rich

It's a totaly different motor, feels strong but is still smooth from bottom to top. Didn't time a run on it yet but after a 7 minute heat race there was
quite a bit of fuel left.

Still running the OS 2060 on it, but want try something else too. Running a Dyn 053 on the +4 in the buggy and liking it.

We need a few more of those pimping stickers

Why?

Are you running 20% ?

A p5 running 30% fuel should have .80mm worth of shimming , the aluminum ones are .30mm and if you actually had a brass shim it was .15mm , there are two sizes of copper .10mm and .20mm . Remember .80mm total , after you feel a little compression loss it is ok to remove one to go from .80mm to .70mm to raise compression to get you by but I would suggest either a new p/s set or having the best in the business perform a recondition/resize on your p/s set , [email protected]

Use all the shims , yes!!

Should be a total of .80mm

Have fun with break in and be patient

Its a plus4 especiale !! LOL

Stickers? Sure , color?

Monty fuel gun looks great cant wait to us it next weekend at the make a wish race

Monty,

Would you recomend me sealing that FMS I'm getting today before I break it in?

Eric

What pipe?


You might have to market that new "Especiale" line, lol.


The black and white ones, need some for the bodies. I have the two on the end of the air filter cover.

Thanks

Jon

I like 9886/41021 or 41020. The 53 works well also not a 9901 fan myself

Lmk if you guys need any engines , ordering more tomorrow

Wow, awesome.

i am sure its better in person as fisheyes or pastes never really do a track justice


fms's , plus 4 C's , p5xlt's , n21r limted's oh my !!! got plenty

no justice eh ....what about this pano/Fisheye.

Jaz240
Tech Champion





Join Date: Aug 2008
Location: ARIZONA
Posts: 5,007
Trader Rating: 4 (100%+)

--------------------------------------------------------------------------------

GO GET EM MONTY!!! This thread should help people realize you know what you are doing and what you are talking about, and why would they not want to buy one of your Moded Mills
__________________
XRAY 808/ Team Terribles/Answer-RC /Torco Race Fuel/Fastlane Graphix/Kal-Gard

Visit www.teamterribles.com to read more about the team or to apply for membership

holy smokes integra!!!


maybe a little bigger pic next time
\

i am getting seasick driving that track , holy smokes