R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Offroad Nitro Engine Forum (https://www.rctech.net/forum/offroad-nitro-engine-forum-157/)
-   -   Team Orion Engines (https://www.rctech.net/forum/offroad-nitro-engine-forum/282133-team-orion-engines.html)

kyosho28 08-12-2013 08:06 PM

They are all the same,EFRA 2058 made by LM.

toyoter91 08-12-2013 08:08 PM


Originally Posted by wildwillydriver (Post 12438378)
Just a quick question for experts, i'd like to buy a 2058 pipe for my Orion engine (i'm now running the 2013). I saw different brands that sell 2058 are they similar or is better to buy the Orion one?
Generally the different brands are cheaper.
Thanks for your time and help.
Bye.
WWD
:)

Yup, same pipe

klujan1001 08-13-2013 05:20 AM

What is the factory carb setting for a crf 5 port

wildwillydriver 08-13-2013 06:44 AM


Originally Posted by kyosho28 (Post 12441365)
They are all the same,EFRA 2058 made by LM.

Thanks, this is a very good info, so any Nvision, Werks, is the same as the Orion one for half the price.
WWD
:)

toyoter91 08-13-2013 06:59 PM


Originally Posted by klujan1001 (Post 12442250)
What is the factory carb setting for a crf 5 port

If i reset my needles I always go back to flush and flush as its extremely close to the stock settings.

nickdawg18 08-28-2013 09:29 AM

What do you guys think about the new RS version due to come out?

cjwilly 10-23-2013 07:08 PM

Here's my story.. bought one of the deeply discounted discovery 5 port combos, took my time to break it in correctly, raced it, loved it.. till the tune started to go crazy all over the place. After some investigating, it seems the flywheel got into the front bearing, tore up the seal and let a bunch of air in. Unfortunately, dirt too... bearings are junk now. Here's the best part, in the noob move of the year, when I reassembled it to pack it away (at the track) I let the backplate get into the piston skirt! Now I can't find a piston and sleeve anywhere! I was loving this engine, just barely had a gallon on it! Does anyone have any leads on where to get a set or any others that will work?

Qan 11-26-2013 03:43 AM

What clutch & spring rate u guys running on crf 5 port in order to get a good bottom and moderate top speed? Tq & apreciate for any inputs.

305M3 02-03-2014 01:30 PM

When will the .22 Truggy engine and the CRF RS's be available?

Hard to believe there has been no action in this thread since late-November...

RevoRacer50 02-06-2014 02:40 PM

That's what I am wondering. I am really looking forward to these new engines.

emacrimes 02-07-2014 08:17 AM

Sorry for the dumb question, can the CRF 3Port work with P3 plugs?

RePeTe 02-07-2014 12:56 PM

yes, that's usually what I use in mine.

emacrimes 02-07-2014 02:45 PM


Originally Posted by RePeTe (Post 12986300)
yes, that's usually what I use in mine.

Ok, thank you!

easy e 02-21-2014 09:04 AM

I see lots of mixed suggestions for the pipe on the FT321; 2013 or 2058

Whats your latest opinion?
What are the performance differences between the 2013 and 2058 ie. is one top end or mid range , low end .. smoother or more torque ?? Thanks for the feedback

luke71933 02-22-2014 10:32 AM

Hi guys,
Which engine do you recommend from these preferable with the one with the maximum lifespans and great all round.
1.)Team Orion .21 CRF REV offroad engine ORI80607
2.)Team Orion CRF Alpha 21 3P 2012 Off/Road Competition
3.)TEAM ORION CRF B321 Factory Team Buggy
ORI80691
4.)REDS R5T 21 Buggy 5 ports + boosters REDS R5T Team Edition
R5T
5.)TEAM ORION Alpha Discovery 3 Port
ORI80657
6.)Picco Picco Boost .21 Turbo Buggy Engine with Pipe & Manifold
P4-4010
7.)Bullitt B217 racing engine

Thankyou


All times are GMT -7. It is currently 05:14 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.