|
had a glance at some of the other novarossi prices in his ebay store..ouch piston/sleeve 150-190 bucks for a top engine and that's without a rod..Up to 150 bucks for a balanced crank:eek:..I do love the price of my GO spares :nod:
|
Originally Posted by Gizmatron
(Post 8149507)
had a glance at some of the other novarossi prices in his ebay store..ouch piston/sleeve 150-190 bucks for a top engine and that's without a rod..Up to 150 bucks for a balanced crank:eek:..I do love the price of my GO spares :nod:
|
Originally Posted by jwm2
(Post 8148769)
Just a heads up, the novarossi carb retaining lock fits the go engines perfectly. They are the same as the ones that come with the gx r series carbs with the o-rings. I broke one last week and bought a couple nova's as replacement. They are about $3/ea on ebay if you search for: Nova Carb or use the following link: http://cgi.ebay.com/Novarossi-18000-...item3a594c475f
$93 for a rear ceramic bearing?!!!!!!! makes me shudder just thinking about that Novas. |
Originally Posted by motomatt
(Post 8150662)
$93 for a rear ceramic bearing?!!!!!!!
makes me shudder just thinking about that Novas. |
Originally Posted by motomatt
(Post 8150662)
$93 for a rear ceramic bearing?!!!!!!!
makes me shudder just thinking about that Novas. I'm all about go engines, i have 4 of them, so i'm not going anywhere else for quite some time. I'm getting in the final piece to my gx5r hopefully today and will begin breaking it in hopefully this week. But while putting the carb retainer in it broke and the screw won't come out, so i had to chuck it and find a replacement. I must have had the threads crossed when screwing it in, luckily it didn't damage anything else, but still left me searching for a replacement part. |
Originally Posted by Gizmatron
(Post 8149507)
had a glance at some of the other novarossi prices in his ebay store..ouch piston/sleeve 150-190 bucks for a top engine and that's without a rod..Up to 150 bucks for a balanced crank:eek:..I do love the price of my GO spares :nod:
|
Originally Posted by jwm2
(Post 8151341)
Who said anything about bearings or any other novarossi parts? I was posting a $3 part that is available in case folks like myself break the carb retaining lock and need a replacement. I contacted several other folks on here about getting a few and none of them had them instock, so i bought the nova version for $3.99 and they are identical.
I'm all about go engines, i have 4 of them, so i'm not going anywhere else for quite some time. I'm getting in the final piece to my gx5r hopefully today and will begin breaking it in hopefully this week. But while putting the carb retainer in it broke and the screw won't come out, so i had to chuck it and find a replacement. I must have had the threads crossed when screwing it in, luckily it didn't damage anything else, but still left me searching for a replacement part. |
Originally Posted by motomatt
(Post 8150662)
$93 for a rear ceramic bearing?!!!!!!!
makes me shudder just thinking about that Novas. |
RUNNE, sent you email bud!!:)
|
Originally Posted by deadmancourt
(Post 8144736)
Today me and my two teammates swept the track today with 3 GX5R motors @ Arc Raceway in Temecula, Ca for the Halloween Club Race!.... I took 1st in Truggy:D and my teammate clint took 3rd....then my other teammate took 2nd in Buggy....it was a great day for Go Engines:sneaky:
|
i loved my go engine while i used it. had the old 5 port. it for sale now if anyone is interest. has like 15 tanks on it, also have a dynamite 053 midrange pipe for it.
|
GO dealer
or you could just call me 214-779-1824
i have all the parts you guys need Complete rebuilds creamic bearing clutch shoes and springs, even new GO flywheels if you need any GO parts just give me a shout Wesley Young (Wes) [email protected] 214-779-1824
Originally Posted by jwm2
(Post 8151358)
I agree, nova's are overpriced. I just finished buying part by part a new gx5r engine, it costed me just under $130-140 for each part (crankcase, piston / sleeve / conrod, carb with inserts, coated crankshaft) i just have to assemble it, which is very easy to do. Thats an entire engine for less than the cost of a piston and sleeve. And when my piston and sleeve need replacing i can get it for about $50 on ebay. Not too shabby if you ask me.
|
there are ALOT of GO dealers on here!....that have all of what you keep listing!..
|
but im not saying stop posting it!...lol....keep on keepin on!..... The Gx series motors are doing GREAT out here in CALI!
|
Was out at Thunder Alley Sunday morning. Was getting ooos and awws over my GO GX5R. I was running it a hair rich because it's still new, but was still pulling everyone on the straight and out punching them on the bottom. Can we say monster?
Will be reppin it up at HCR this Saturday! |
| All times are GMT -7. It is currently 02:56 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.