Whats his name....22racer, or racer 22 that hangs here? hes an aurhorized dealer,I think, he may be able to help you. Also saw this, http://bbthobbies.com/product.php?productid=21100
When I hit add to cart it didnt say back ordered or what ever..

Nice looking track Giz!That had to be alot of work, but probably worth it to have a place to race,huh

Is this the price with the modd or not? If mot how $$?? $$210

:nod: yep that is the US pice of the motor posted to you

In my D8 buggy I have a GO 3-port sport modded by Rex Welch (22Racer) and he does shorten the LSN. Running it with a Dynamite 086 and it has plenty of power for the buggy. This is an awesome engine and Rex is great to work with.

In my D8T I have a GO 5-port and I put this LSN in http://www.amainhobbies.com/product_...hrottle-Needle
It is a short LSN... in case you don't want to hassle cutting and grinding... or are not confident enough to do the mod yourself... lazy :lol: ... whatever :D
Also running it with a Dynamite 086.

I have ordered two of those needles so far. The one went into my 5-port and the other is going into a the GO race carb I bought that will go into my 3-port sport once I get my O-Rings from MM.

i havent checked the differance yet but if you have a older carb with a short lsp needle is the same length as what is been moded ? i have a few of these shorter needles

I just measured the new one I have (from the link I provided) and it is 1.439 inches overall.
I think Rex says to cut them down to 1.42 inches and round the end.
I didn't take out the one he modded for the 3-port sport since I am still waiting on my O-Rings from MM.
My original 5-port LSN measures 1.611 inches overall. Hope that helps some.

sweet thanks mate

Took me 350 hours last winter and 22 tons of dirt to turn what we had into a championship circuit..All with a shovel and a wheelbarrow mind you..We hosted the 1/5 scale "championnat de france" last weekend and 52 drivers over 3 days ripped the track to shit and back..ruts and holes you could fall into.sigh!... but with a little help I repaired the lot evenings this week and its better than before..used a cultivator to rip out the corners and mixed in cement and lime to stabilize the soil..much firmer now..still got a day or two's work to finish it yet..and for next year we've been offered the FINAL of the "coupe de france" which is a huge kudos race..I gather for those that are interested and speak french that rcmag has a big write up..

exactly what part of needle are you measuring aor you measureing the whole needle ?

The measurements are of the whole needle from one end to the other.

Hey everyone I need a conrod for my Novarossi plus 21 5 and heard that the go conrod will fit in certain novarossi motors any truth? Can I do this?



Thanks

Question..

Today was warm and humidity still high and was again chasing for tune at finals...

Got 5port, long LSN, gap is about 0.7, inserted for truggy IRDC insert 6.5mm..

Should anyway hsn stay at about .5turn in? and about 2.something with lsn?

The bottom from corners was sort of ok, but top was like...nothing and going 10mph..
Tried to richer top but did not helped..can't figure, just wondering, with 6.5mm restrictor what would be settings, and actually when you change inserts from let say 7 to 6.5 or 6 what is actual diference?

Thanks.

P.S. Unbelievable, 150ml tank was for 5.5minutes.....

Sounds like you're rich. How did it run on the starter box after warmup? Smoke? Fuel dripping out? Check glow plug? When is the last time you sealed the engine?

:nod:thanks