![]() |
As you know the 5 port only has 2 pipe recommendations 0801-086, I love the 086 on mine tried a JP-3 hated it. Just try what you want if you like it thats all that matters. I havent seen or heard of any other pipes working well on it though.
|
Originally Posted by malik
(Post 5518519)
The Dynamite pipes are $47.
|
Originally Posted by malik
(Post 5518546)
As you know the 5 port only has 2 pipe recommendations 0801-086, I love the 086 on mine tried a JP-3 hated it. Just try what you want if you like it thats all that matters. I havent seen or heard of any other pipes working well on it though.
|
The 007 will work ok. But like everyone else has said, it's not the right pipe for any of the Go motors. You may think it goes great, but for the sake of $47 you are not getting anywhere near the performance you could out of the 5 port when fitted with the 0801 or 086. So if your performance is a little flat, don't go blaming the motor :(
|
Originally Posted by rearviewmirror
(Post 5518524)
I don't need all of the power of the 5-port, our track is short and technical.
|
Ed at Eb recommends the 9886 for his modded motors.
Rex |
hey guys what about the 3port race engine? what pipe then? 007, 053, or 086. if you cant tell i would like to keep things under 50 so im looking at the offerings from dynamite. thanks!
|
The Dynamite 086 for either the 5 or 3 port.
|
the 3 and 5 port have good bottom end, so the 86 is the best choice it will help the engine on top end
|
Tree where did you get yours at for $39? For that i will get another. I am probably going to need a 053 soon.
|
I've decided I'm going to spend the extra dosh and get the GO 0801 for my new 5-port. I would imagine the Go engineers know best what works with their exhausts.
|
Originally Posted by malik
(Post 5520737)
Tree where did you get yours at for $39? For that i will get another. I am probably going to need a 053 soon.
http://www.bluegrasshobbies.com/bg/c...466dba4e57739f |
http://www.bluegrasshobbies.com/bg/catalog/index.php?cPath=27_160&osCsid=922170e1b73b3d5feb46 6dba4e57739f
$41.99...still not bad for a new, hard coated Dynamite Platinum pipe |
Originally Posted by rearviewmirror
(Post 5520747)
I've decided I'm going to spend the extra dosh and get the GO 0801 for my new 5-port. I would imagine the Go engineers know best what works with their exhausts.
|
so i need a motor for my truggy. Anyone got one that was slightly used or brand new they want to sell??? Need to have one so i can get this truggy ready.
|
| All times are GMT -7. It is currently 02:55 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.