may be your clutch is not set up right? too much clearance between the clutch shoe and the bell??

one charactristic on the red shoe is they will get sticky when they are hot, and lead to a false read!

I can tell you this much, red shoes last at least 3~4 times longer then grey shoes. I have been runing the same red shoe since the first day I got the MRX3.

If you go to a fastener/nuts and bolts supplier, I used Warren Fasteners in Charleston, SC. I buy all my screws in Bulk, 100 or more. I bought the hard/steel ones, every screw in the car, 100 each. I got every screw/set screw (all 21) that are used in the MTX3 for less than $60 shipped. Some items I had to get by the 1000(set screws). If you look in your area, I am sure you can find a dealer.

anybody here knows the part # on the new front plate from mugen?
thanks
nelly

centex clutch
 

HI
I need a little help with my clutch
which one of the two thurst washers goes on first, the one with the larger hole or the one with the smaller hole. The instructions say to put the one with the large hole next to the thrust bearing ?
Any info woulde be great .
Thanks
Lroy

Large hole first, small hole on the outside.

Re: Screw
 

try 25198 from ae, they are 2.6mm flat head but you´ll just need to cut their lenght with dremel, or LXFCK0 from kyosho.
all from tower hobbies.

Re: Re: Screw
 

B0649 Mugen part number for those screws and you can buy or order them from your local hobby store.

One of the coolest thing about any Mugen car is you don't have to use other people parts on a Mugen car and that includes screws, if you can't find a part please give us a call and we'll be more than happy to help you find it.

hey robbie c
i saw this carbon fiber front plate at the mugen site is that for the mtx-3 or for the mrx-4 do you have the part # for it

nelly

H0473 this part is only for the MRX-4 sorry.

is it so? atomic hobbies from miami has backordered me the conversion belt from kawahara which we know mugen racing distributes. do you have any idea when will you have them in stock. been waiting for a month now.

I just checked and found out Kawahara Japan is out of stock so these belts are on back order I'll keep Atomic in form and let Tony no when they come in..........sorry

for those who need the conversion belt, please check my post on the for sale section. thanks for the support you guys.

Lola Body
 

What is the best Lola body to fit the mtx-3? And where can I get it. Thanks

i used to have frewer which you can get at speedtechrc.com