Originally Posted by Paolo M
(Post 10808130)
Good to hear. Don't overfill the diffs. Just put enough until you almost cover the cross.
Do you put the same 1.2 grams of oil in the GT diff as you do in the 747? Are you going to be runnin GT at the Byron's Challenge? |
Originally Posted by Cayo71
(Post 10804596)
So I'd be interested to know what bodies people are considering for it.
|
Originally Posted by Paolo M
(Post 10807538)
Hi guys, the wait is over. We ship more than 120 kits yesterday all over USA. More kits are shipping as soon as we get our second batch.
More than 90% of the parts are in stock since they are the same as the 811 Off Road Cars. A few of the GT only parts are already in and more are coming early next week. I will by available for tech information here, Please don't pm me because i always forgot to go check my pm's:( I am waiting for Serpent to upload the editable setup sheet so i can post the setups i have ran so far. The link for the GT setup ares is: http://serpent.com/product/600040/setups/ The default setup is very close at what i have being using. Please remember that all my test have being made with Alpha tires and Alpha R3 body. Enjoy the build Paolo Daniel |
Hey Daniel,
Sounds like you, me, and Tony will be running a Cobra real soon. Tony and I are going to Houston next Sat to test and tune. If you have yours by then you should join us. Chad |
+ 1 more... Will have mine on Monday..:tire: :nod: :tire:
|
Picked up the 747 last week... :nod: :tire: :nod:
|
Originally Posted by Speyederjedi
(Post 10810056)
Thanks Paolo! Looking forward to building my first Serpent and definately not my last. Planning on also getting the new 747. My work bench is ready for the build on the Cobra GT!
Daniel |
My Cobra GT8 body
4 Attachment(s)
Will look better on the car, all painted NO STICKERS!!
Thanks Jim!! PAINTED BY JIM AVILA, @ WWW.RC-INK.COM 713-854-1281 |
Originally Posted by tonylunatic
(Post 10814459)
Will look better on the car, all painted NO STICKERS!!
Thanks Jim!! PAINTED BY JIM AVILA, @ WWW.RC-INK.COM 713-854-1281 |
Originally Posted by chaderick
(Post 10810846)
Hey Daniel,
Sounds like you, me, and Tony will be running a Cobra real soon. Tony and I are going to Houston next Sat to test and tune. If you have yours by then you should join us. Chad Regards, Daniel |
just starting to build 2 cobra gt cars for customers. gonna be a long night..... but fun:nod:
|
Finished a build for my neighber yesterday now just gotta get him to stop playing with the curbs at the Costco parking lot :cry: and come with us to the track:nod:
Absolute Hobbyz has 27 Cobra GT kits in stock come and getem:nod::D |
Originally Posted by chaderick
(Post 10809817)
Paulo,
Do you put the same 1.2 grams of oil in the GT diff as you do in the 747? Are you going to be runnin GT at the Byron's Challenge? |
Originally Posted by tonylunatic
(Post 10814459)
Will look better on the car, all painted NO STICKERS!!
Thanks Jim!! PAINTED BY JIM AVILA, @ WWW.RC-INK.COM 713-854-1281 |
Originally Posted by J-MAN
(Post 10819741)
just starting to build 2 cobra gt cars for customers. gonna be a long night..... but fun:nod:
Chad |
Picked up Cobra GT today and build has began!!!! :nod: :tire: :nod:
|
Got motor and pipe ordered... Getting ready to test this weekend at Gulf Coast Raceway.. Now I just need to build the kit.
|
http://a2.sphotos.ak.fbcdn.net/hphot...97769313_o.jpg
Event : "Copa Mitad del Mundo 2012" (Mid of the World Cup 2012) Location : Quito City - Ecuador Classes : 1/10th IFMAR Nitro Sedan and GT (Copa del Pacifico Rulebook) Dates : 17th to 19th of August 2012, Open track starting on Wednesday 15th Come to southamerica to burn some nitro GT Racers !!! cya ! |
I forgot I had pre-ordered a Cobra, until the UPS guy showed up yesterday.......not a chance to hide it from the wife, had to put the blame on Paolo....he he he:batman::ha:
|
2 cobra gt cars forcustomers
2 Attachment(s)
here a few pics of freshly built cobras
|
I'm getting mine tomorrow
|
Originally Posted by Erchur
(Post 10825533)
I forgot I had pre-ordered a Cobra, until the UPS guy showed up yesterday.......not a chance to hide it from the wife, had to put the blame on Paolo....he he he:batman::ha:
|
Originally Posted by J-MAN
(Post 10827259)
here a few pics of freshly built cobras
Im awaiting to build 1 for a customer |
2 Attachment(s)
here is the 2nd with a btt, and Jason Beam building his car at the shop. lol
|
Cobra GT
Anyone, can I put an on-road engine on this GT?
|
Originally Posted by Skaidragon
(Post 10829202)
Anyone, can I put an on-road engine on this GT?
|
GT
Originally Posted by bassman2
(Post 10829391)
You can put any .21 to .28 engine in these GT cars. As long as your gearing and pipe/header/clutch selections are setup for the particular engine you are running (onroad or offroad engine).
|
Just got my Cobra GT from IGTHobbies today!!!! Two days to build and headed to Gulf Coast Raceway for some test and tune with my boy!
|
Where is everyone getting tires? GT tires must be the hardest thing to get. Can not find Alpha softs anywhere. Everyone is out of stock!
|
tail lights
gonzo i guess new gt bro! still don't mean you going to pass me bro:lol: i'm getting all that practice time in b4 the byron race:p
|
Originally Posted by djmorales
(Post 10830077)
gonzo i guess new gt bro! still don't mean you going to pass me bro:lol: i'm getting all that practice time in b4 the byron race:p
|
Cobra GT is all together.. Going to track today for some test & tune!!! ;) :tire: :nod: Also will have the 747 out there too (;
|
I'm really curious to see one of these go myself. Just getting back into hobbies after a loonnnng hiatus and I always wanted a Serpent.
|
I went to the track today with a friend with our Cobra GT cars.. I ran about six laps and then then rain started pouring but I was interested in the cornering of the car and I must say it corners like a 10 scale :nod: I will be going back out in the morning with my Cobra if it does not rain.. Hands down to Serpent for another great car... :nod: :tire: :nod:
|
DIFF HELP!!!!!!!!!!
What is the trick to get the diff mesh right. I was hoping a high dollar kit like the Serpent there would be no need for diff shims. I have tried one and each side, two on the left none on the right, two on the right non on the left, one on the right none on the left, one on the left none on the right, none on the left none on the right. The diff mesh doesn't feel smooth to me. It seems to be at it's best when I put two shims on the side opposite the 44t gear but still not at my liking. Is this normal???? :mad:
|
Same here. I went with no shims on either side, mesh was too tight. Once you put it on the chassis it fits nicely. I was going to ask if anybody dis the same. I'm taking my time with the kit 3.5 hrs so far and I only have the rear assembly done. I'm not having any problems except I might need a new 2.0 hex driver when I'm done with the build. Plastics are tight.
|
Taking my time as well. Rear assembly is completed. I tried the shims several different ways on the diff and finally felt is was a bit better without them at all since the fit was so good. Once I have it all together and make some practice runs I may take the front and rear assemblies back off and double check the diffs just to be sure mesh is good with the ring and pinion.
|
Originally Posted by chaderick
(Post 10835168)
What is the trick to get the diff mesh right. I was hoping a high dollar kit like the Serpent there would be no need for diff shims. I have tried one and each side, two on the left none on the right, two on the right non on the left, one on the right none on the left, one on the left none on the right, none on the left none on the right. The diff mesh doesn't feel smooth to me. It seems to be at it's best when I put two shims on the side opposite the 44t gear but still not at my liking. Is this normal???? :mad:
Might be something to look at. |
Originally Posted by jasoncb
(Post 10830027)
Where is everyone getting tires? GT tires must be the hardest thing to get. Can not find Alpha softs anywhere. Everyone is out of stock!
|
Originally Posted by chaderick
(Post 10835168)
What is the trick to get the diff mesh right. I was hoping a high dollar kit like the Serpent there would be no need for diff shims. I have tried one and each side, two on the left none on the right, two on the right non on the left, one on the right none on the left, one on the left none on the right, none on the left none on the right. The diff mesh doesn't feel smooth to me. It seems to be at it's best when I put two shims on the side opposite the 44t gear but still not at my liking. Is this normal???? :mad:
What's up with those plastic 3mm nuts? Those had to go and replaced with steel 3mm nylon lock nuts. Just picky minor stuff. I also had issues with the flanged 3mm screws, metal seem too soft and strip easily, specially if using a power driver. All in all I'm extremely impressed with the car, it will certainly take the GT class to a much higher level, we will no longer be the bashers wannabe racers. It will not surprise me to see more GT than sedan entries at our local races:nod: Well done Serpent! Made us wait a long time, but wait was well worth it. I'm putting the final touches on the car and planning on heading down to Mike's tomorrow to burn some rubber:nod::tire::nod: |
All times are GMT -7. It is currently 06:30 AM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.