Capricorn LAB C801 1/8 scale
#406
DJ, WHICH SPRING AND CLUTCH SHOE ARE YOU USING ? ALSO, ARE YOU USING THE SET SCREWS ON THE FLY WEIGHTS ?
THX
THX
#407
Tech Elite
DJ Apolaro
#408
i SUPPOSE THAT IS THE SOFT SPRING, NOT THE HARD SPRING THAT CAME WITH MY KITS, RIGHT ?
#409
Tech Elite
Based on the spring I noticed in Paulie B's clutch. He had the same black spring I am using and he just got his kits. I think they are putting the spring I am using in the kits now. If you have the same spring as Paulie than we are all using the same spring.
DJ Apolaro
DJ Apolaro
#410
I did not get a black spring in my kit, it's silver.
hmm
hmm
#411
Tech Elite
I think the silver spring is the super hard spring. Measure it in length and thickness. It needs to be between 9.5 and 9.8 in length and 1.7 to 1.9 in thickness. I do know that my spring in not silver and at the Worlds I could not get the silver to work. After the Worlds and some testing I found out it was the spring that was the entire problem I was having with the clutch dusting.
DJ Apolaro
DJ Apolaro
#412
I think the silver spring is the super hard spring. Measure it in length and thickness. It needs to be between 9.5 and 9.8 in length and 1.7 to 1.9 in thickness. I do know that my spring in not silver and at the Worlds I could not get the silver to work. After the Worlds and some testing I found out it was the spring that was the entire problem I was having with the clutch dusting.
DJ Apolaro
DJ Apolaro
sounds good, im going to try the black one. because I am still having some dusting problems with mine and i'm using the silver spring.
I also noticed the silver spring does not spin freely in the cup or the nut.
#413
Tech Elite
Hey guys,
Good results for the Capricorn this past weekend at the Xray Challenge
My 1/8 scale was great all weekend
http://www.redrc.net/2011/08/dj-apol...ge/#more-46433
Good results for the Capricorn this past weekend at the Xray Challenge
My 1/8 scale was great all weekend
http://www.redrc.net/2011/08/dj-apol...ge/#more-46433
#414
Hey guys,
Good results for the Capricorn this past weekend at the Xray Challenge
My 1/8 scale was great all weekend
http://www.redrc.net/2011/08/dj-apol...ge/#more-46433
Good results for the Capricorn this past weekend at the Xray Challenge
My 1/8 scale was great all weekend
http://www.redrc.net/2011/08/dj-apol...ge/#more-46433
#415
I think the silver spring is the super hard spring. Measure it in length and thickness. It needs to be between 9.5 and 9.8 in length and 1.7 to 1.9 in thickness. I do know that my spring in not silver and at the Worlds I could not get the silver to work. After the Worlds and some testing I found out it was the spring that was the entire problem I was having with the clutch dusting.
DJ Apolaro
DJ Apolaro
#416
Tech Elite
Vidal,
I will be there at the GLC also. See me if you need any help.
DJ Apolaro
I will be there at the GLC also. See me if you need any help.
DJ Apolaro
#417
#419
Tech Elite
DJ