Serpent 733 1/10 200mm touring
#1786
Send me the plane ticket and Ill go help you set up
A Murnan engine, that will be around 80% of the setup.
#1787
Will be there news for 733 this year???...
Last edited by and23; 01-15-2010 at 03:41 PM.
#1788
Tech Master
iTrader: (9)
Join Date: Mar 2003
Location: ไกล, 遠, jauh, 먼, ver, 遠い, lontano, بعيدا, xa
Posts: 1,224
Trader Rating: 9 (91%+)
#1791
Since I don't know very much about the 733, I ripped through the first 70 pages of this thread today. The price thing is just hilarious. Seems like there were/are some quality assurance issues at the factory with the first batch of kits. I hope all of that got straightened out. And the fuel tank - bah!
I came across some pretty interesting questions and some very helpful answers. It was good to see people posting their setups. And don't forget, you can use the blank setup template file that Serpent has at their Web site to share your setup with others - http://www.serpent.com/file.php?FileID=5014 You can't save it once you fill it out, but you *should* be able to print it to a file and then post that for people to download/view. << What a pain in the butt, every time you change something, you have to fill the whole thing out again. There must be a better way. >>
Serpent really needs to clean up their setup page so that each car is listed in a separate section. http://www.serpent.com/racing/setups/
I'm going to try and get through the remaining 50 pages tomorrow (Ha! I mean today, it's 4am here right now). Should be interesting to read what's been going on for the last 4 1/2 months.
I came across some pretty interesting questions and some very helpful answers. It was good to see people posting their setups. And don't forget, you can use the blank setup template file that Serpent has at their Web site to share your setup with others - http://www.serpent.com/file.php?FileID=5014 You can't save it once you fill it out, but you *should* be able to print it to a file and then post that for people to download/view. << What a pain in the butt, every time you change something, you have to fill the whole thing out again. There must be a better way. >>
Serpent really needs to clean up their setup page so that each car is listed in a separate section. http://www.serpent.com/racing/setups/
I'm going to try and get through the remaining 50 pages tomorrow (Ha! I mean today, it's 4am here right now). Should be interesting to read what's been going on for the last 4 1/2 months.
#1792
Serpent really needs to clean up their setup page so that each car is listed in a separate section. http://www.serpent.com/racing/setups/
#1794
Well, if you check out the 733 product page you'll find a link to the 733 specific setups: http://www.serpent.com/product/804000/setups/
Then they should just provide a link to each individual car's setup page, because the files are not the same.
#1795
#1796
#1797
One setup page that lists multiple cars.
http://www.serpent.com/racing/setups/
And one setup page for just the 733.
http://www.serpent.com/product/804000/setups/
Julius directed me to the dedicated 733 page, which I had not noticed earlier.
http://www.serpent.com/racing/setups/
And one setup page for just the 733.
http://www.serpent.com/product/804000/setups/
Julius directed me to the dedicated 733 page, which I had not noticed earlier.
#1798
Tech Master
iTrader: (2)
Have you ever been to or even seen the Lostallo track?. It is huge, on Lostallo an engine could really make or break your laptime.
The fact that you start bashing someone based on the brand of car he drives tells me enough about you.
Guess what, I even got Serpent parts mounted on to my NT1.
#1799
#1800
a friend of mines is building his 733 and cant seem to decide on a pipe for his o.s. 18tz motor. Any suggestions on a pipe and manifold? Low end power is what he needs.