Wap

just my luck out of stock.

Paolo M

Wap,

we have plenty in stock. Your LHS can get it without any problem

Serpent USA

Wap

thanks dude, I will try there. I will start striping down the 710 and do a complete rebuild. Hopefully will have the new parts to put in.

Orfeous

i found a page with some tips! i hope that everybody haven't seen it yet

http://www.daltonshop.com/tips_tricks.htm

impulsed

hey guys -

I was told to ask this here - can be Impulse streetspec still be competitive at club races? Any parts out there that would really improve performance?

Thanks

Edgar Millenium

Yes you can, but you will need to be good, and also be good finding spare parts.

Sow&Steady

Yes, the Impulse can be competitive but compared to the latest generation cars, it is a little heavier. I used to run the car with Al. screws (or titanium if you can find them) and ceramic bearings. There's a few other things to do too if you want to be really competitive but that's another topic.

impulsed

thanks for the help...any idea where i can find these screws or bearings?

Sow&Steady

The Al screw were the Serpent Veteq ones. I don't know if anyone still sells them.

There are many online shops that sell ceramic bearings but bocabearings.com have them by set, there was one for the Impulse/705 but I've not checked recently.

Sow&Steady

Ah! Lucky you, they still stock them ...

http://www.bocabearings.com/main1.as...pg=1&psg=10,48

Look at page 4, third one down.

impulsed

thanks for the help sow...but, if i'm reading that right, its $400 for the set, which would be a new 710 wouldn't it?

I'm probably not good enough to even notice a difference now, I'll just run the Impulse and maybe pick up another cheap roller for parts and see where it goes from there

hell, if I bought the 710 now the 720 will be out next month

FAST1

It should be in a coulpe of months...........sometime in May.

Sow&Steady

That's the premium ones, the normal ceramic ones are about $200 ... these are the one I use.

Hmmm ... you know something I don't know?

Sow&Steady

Really?

Xyvern

I just notice when I turn the front tires to the right, the servo arm is hitting the radiotray plate. Did I do something wrong