|
Fuel tank
Hey guys i have just replace the foam around the fuel tank lid and now it wont shut properly because the foam is too thick. Do i have to leave them to settle before use?
|
Re: Fuel tank
Originally posted by Brett.w Hey guys i have just replace the foam around the fuel tank lid and now it wont shut properly because the foam is too thick. Do i have to leave them to settle before use? I changed mine some time back DIY. Cut a piece of foam a friend passed to me which actually came from inside a cigarate box ! |
Re: Mysterious 17T copper gear!
Originally posted by markp27 Ok, mystery solved - somehow the 17T copper coloured gear simply doesn't fit together with the 22T gear (or anyother for that matter). Check out the pic: http://www.3hobby.com/modules/copper...03/17tGear.jpg See how there is a built in shim on the copper coloured 17T, but also how it can't be screwed down sufficiently onto the other gear, therefore leaving a gap! This leads to the bearings being too deep into the bell housing and the clutch gap being too small. Report on its way to Serpent :D |
Re: Re: Fuel tank
Originally posted by InitialD I thought Rene or Julius posted some kind of instructions on the mytsn 710 forum. But yes, just let it settle. But before settling, make sure the foam is very well centered in the cap so that when it closes, the foam piece is spread out evenly and equally around the tank hole opening. I changed mine some time back DIY. Cut a piece of foam a friend passed to me which actually came from inside a cigarate box ! |
Re: Re: Re: My Winternats Weapon!
Originally posted by markp27 And why haven't we seen any pics of Lock&Loaded? :mad: |
Re: Re: Re: Re: My Winternats Weapon!
Originally posted by markp27 BTW: Nice Avatar! :eek: :nod: |
Re: Re: Mysterious 17T copper gear!
Originally posted by markp27 Problem solved :D First class customer support at Serpent, means a new 17T gear is on its way already!!! :eek: :nod: So you had a lemon 17T? Is this isolated or are all bronze 1st gear pinions like that? I have never bought a 17T bronze pinion. Only a 16T if I recall and did not have any installation problems like you described... |
Re: Re: Re: Re: Re: My Winternats Weapon!
|
Re: Re: Re: Re: My Winternats Weapon!
Originally posted by crashed_1 ...coming soon...:sweat: :sweat: :sweat: |
Re: Re: Re: Mysterious 17T copper gear!
Originally posted by InitialD Hey Mark, did you exchange your "faulty" rear shock tower too? :sweat: :lol: :lol: :lol: :cry: So you had a lemon 17T? Is this isolated or are all bronze 1st gear pinions like that? I have never bought a 17T bronze pinion. Only a 16T if I recall and did not have any installation problems like you described... Not sure what the problem was with the 17T, Ronald simply said he would send me a new one. Cheers, Mark. |
Hi D I have a Set Up question for you, we are going to race next week in the longer & lest technical track of the Club and also with less Traction. This track has to big sweeper’s first one going in to the long straight and the other going out.
The Set Up I have which has work OK; is for a small very technical high traction track, which is the following: SPUR: 60/55 – 17/22 DRIVE TRAIN: Ball Diff front Medium Soft – rear Medium SHOCK: Front & Rear Alu with Red Spring / 35 front 3 holes --- 45 rear 3 holes ANTI ROLL BAR: Front Flat Rear 2mm in (2.5mm) TYRES: Front & Rear 40 Shore New Elegy ROLL CENTER: Front 1mm under - Rear UTI / LT DOWN STOP: Front 0mm – Rear 7mm CAMBER: Front L 2 R 2 - Rear L 3.5 R 3.0 TOE: Front -1 Rear +2 CASTER: 3mm in front Appreciate any comments |
Re: Re: Re: Re: My Winternats Weapon!
Originally posted by markp27 :D You've probably forgotten by now, but that's its natural colour :lol: BTW: Nice Avatar! :eek: :nod: |
Originally posted by markp27 Ceramics are fine for the Winternats *phew* Don't worry, that engine is going to be run it Slow&Steady :weird: :eek: :lol: :lol: :lol: |
PRICES ON NEW MEGA ENGINES
.21 MEG 201500 M21 Sport $253.37, MEG 201501 M21 Race MS $307.97
.12 MEG 201000 M12 Legal Sport $198.07, MEG 201001 M12 Legal Race MS $230.97, MEG 201003 M12 Outlaw Race MS $230.97 THESE ARE THE PRICES.....CHOCO |
Re: PRICES ON NEW MEGA ENGINES
Originally posted by SERPENTFREAK69 .21 MEG 201500 M21 Sport $253.37, MEG 201501 M21 Race MS $307.97 .12 MEG 201000 M12 Legal Sport $198.07, MEG 201001 M12 Legal Race MS $230.97, MEG 201003 M12 Outlaw Race MS $230.97 THESE ARE THE PRICES.....CHOCO BTW, you coming to the WinterNats? |
| All times are GMT -7. It is currently 04:27 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.