|
If your setting up for a fuel gun hole 'directly' above the tank lid, using a cable tie to pull open the tank, then sure like Robert had at the EC with long grub screw would be fine.
But it's just the a club/test body shell, where the bulk of my refueling is going to be from a bottle, pulling the tank open with a thumb, and I did not want the hole that far onto the roof for all that, the hole I made is about 8mm onto my roof, meaning 3rd post kind of needs to be further forward. I don't see how what I did can foul the servo saver in any way?, |
Originally Posted by Bishop
(Post 9690065)
If your setting up for a fuel gun hole 'directly' above the tank lid, using a cable tie to pull open the tank, then sure like Robert had at the EC with long grub screw would be fine.
But it's just the a club/test body shell, where the bulk of my refueling is going to be from a bottle, pulling the tank open with a thumb, and I did not want the hole that far onto the roof for all that, the hole I made is about 8mm onto my roof, meaning 3rd post kind of needs to be further forward. I don't see how what I did can foul the servo saver in any way?, maybe can foul it when you turn turtle.. i dunno but i just feel not safe or right with it. Coz underneath it is the bearing.. |
3 Attachment(s)
ARROWMAX Released MTX5 Spare Parts
|
Originally Posted by Bishop
(Post 9690065)
If your setting up for a fuel gun hole 'directly' above the tank lid, using a cable tie to pull open the tank, then sure like Robert had at the EC with long grub screw would be fine.
But it's just the a club/test body shell, where the bulk of my refueling is going to be from a bottle, pulling the tank open with a thumb, and I did not want the hole that far onto the roof for all that, the hole I made is about 8mm onto my roof, meaning 3rd post kind of needs to be further forward. I don't see how what I did can foul the servo saver in any way?, Kindest regards, Lars. |
does anybody know when it whill be available in europe the mtx5???
|
the car is on the way to europe. should be here in the next 2 weeks.
|
I receive mine yesterday! And I am starting to build right now!!! :tire:
|
FedX said mine will be here TODAY:cool::tire::tire:
|
I got mine last monday... and i finish it yesterday... Im in Spain (europe) thanks to my asian friends!!!
|
Nobody else had problems with the rear camber links? when I use 0 offsett wheels and 199-200mm with then only about 1-2mm treads are into the ball link, I had to get some xray links and bals that I had to get it to work.
And the button head srews are not good and to big in the hex slot. Other then that I liked it just a lot of understeer with stock setup |
Originally Posted by chovden
(Post 9693829)
Nobody else had problems with the rear camber links? when I use 0 offsett wheels and 199-200mm with then only about 1-2mm treads are into the ball link, I had to get some xray links and bals that I had to get it to work.
And the button head srews are not good and to big in the hex slot. Other then that I liked it just a lot of understeer with stock setup |
Anyone else notice all the different setup sheets?, the download-able one is different to the one that came in my kit, and Japan gets a different one also, I think the one with my kit also has some changes from even the build instructions.
Though now we have a Robert EC sheet and a Fukuda sheet. |
Originally Posted by Seisick
(Post 9661251)
dear sir, what is the size for the rear body screws that are white in the pic
|
Christmas ""
2 Attachment(s)
The little baby brother came today. Im about 2 hrs into build and a friend gonna help later on tonight and saturday. Ill be on the track sunday at High Noon "" looks like another good car so far again.:D
|
It's here:D
|
| All times are GMT -7. It is currently 07:09 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.