Hello there Mavic, welcome to the team :)

Just keep no more than 6 teeth difference for the pinion gears and always check the 2-speed shoe I think you won't have that problem.

my last sunday ride setup:

front shock piston 3hole,500 Xray oil,stock spring,mid position.
toe out .5,ackerman c,track width 198,camber 3,lowest RC.
1way,40grp 62mm,25t pulley,45 swaybar.

rear shock piston 2holes,500 Xray oil,stock spring,2nd low position.
toe in 1.5,stock set linkage,199.5 width,camber 3,2nd low RC.
80k Xray dif oil,40grp,2.4 sway.

pinion 17/22
spur 60/54.

i shall try the 100k rear diff nex session..;)our track suitable on 1way,we have tried on front mid&solid&diff,ez to drive but slower..

oh i see..the teeth different on spur?how can you use 15/22?unless you need really kow take off and long straight power..:blush::sneaky:the 1st&2nd drop ratio is too big to handle and not a good combination..i think.:rolleyes::nod:

anyway glad to have on same team..looking forward to race together again..:cool:

hey bro..been sometimes huh..good car and good choice.i wouldnt think on the price really after riding on it,satet of the art with passions..;)
congrate Xray to come out with a great car..hope upcoming ifmar will be more merrier with NT1 around..;)

NT1 driver......the car is good and all NT1 driver too...:D
Welcome to the team MAVICXXX...!
Hope u will enjoy driving NT1.

Deleted

good setup...

this setup remind me Travel Hotel.. hahahahahaha

:ha::ha:

Please post any pics u took at Travel Hotel :lol:

What's good setup for travel hotel ? ..... I'm newbee.

King size bed... :D:D:lol::lol:

Hey Daniz24......... where is my NT1 #2 ? ...... hurry up dude :lol::lol:

Just to inform :

Futaba receiver R113iP PCM1024 doesn't fit into NT1 receiver box. :rolleyes:

I have to dismantle R113iP and put only the PCB into NT1's receiver box ( of course I covered it with foam for less vibration ).

http://www.futabarc.com/radioaccys/futl0300.jpg

I think this one won't fit either : Futaba R303FHS - 3-Channel FM (Synthesized)

http://www.futabarc.com/radioaccys/futl7619.jpg

That's a shame...I guess the only other alternative would be to use the graphite receiver bracket #336040, but then you would have to be creative with protecting the Rx from fuel, etc.
It makes me glad I have my small KO 302f receiver :smile:.

the futaba 2.4 fasst reciever will fit no prob.

The futaba receiver R113iP PCM1024 fits just perfect in the receiver holder .:nod: Just fitted mine now