R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Nitro On-Road (https://www.rctech.net/forum/nitro-road-3/)
-   -   Xray NT1 (https://www.rctech.net/forum/nitro-road/141149-xray-nt1.html)

jonrg 04-08-2007 01:32 PM

Teemu Leino running an NT1 makes 2nd in A Main at EFRA GP in Spain
http://www.redrc.net/2007/04/darren-...anish-efra-gp/

rmdhawaii 04-17-2007 02:40 PM

NT1 wins again! 1st round of the Dutch Nationals
http://www.teamxray.com/teamxray/new...0-%201st%20Rnd

Does anybody know why Jilles' 2nd gear failed? :weird:

MBlackketter 04-17-2007 03:29 PM


Originally Posted by rmdhawaii
NT1 wins again! 1st round of the Dutch Nationals
http://www.teamxray.com/teamxray/new...0-%201st%20Rnd

Does anybody know why Jilles' 2nd gear failed? :weird:

Ralph has run the some set of gears on his car since Ft Myers. That's about 3 hours of running on that set of gears so far.

Maybe a small rock in the pinion gear?

Mark

rmdhawaii 04-17-2007 04:11 PM


Originally Posted by MBlackketter
Maybe a small rock in the pinion gear?

Perhaps. :)

Would be interesting to note if other people were stripping gears (lots of small rocks on the track) - or if something happened prior to the gears stripping (flipped the car, into the grass, hit something, somebody hit him) - or if something particular was going on when the gears stripped. Maybe he found something after the fact.

I'm not really pointing at the gears themselves, just try to understand the circumstances. I could be mistaken, but I think this is the first time I've read that an NT1 stripped a gear. I also think it's the first time I read a race report that someone won a race with a stripped gear. Most guys just retire. :D

Nitrogasm 04-17-2007 04:34 PM

. didn't he run over 900 laps at the winter nats with no problems ?
think about all the nt1's running in competition recently and all the laps under those cars . i think a gear stripping problem would have surfaced long before this incident

rmdhawaii 04-17-2007 04:37 PM


Originally Posted by Nitrogasm
i think a gear stripping problem would have surfaced long before this incident . didn't he run over 900 laps at the winter nats with no problems ?

I don't think it's a gear stripping problem at all.

miker2209 04-18-2007 05:11 AM


Originally Posted by rmdhawaii
I could be mistaken, but I think this is the first time I've read that an NT1 stripped a gear.

It is also true that the car is not in the hands of the consumer, so there are not so many out there running.

DS Motorsport 04-18-2007 11:32 AM

I was at the race were jilles stripped the gear.
It's a very rough track, it was also very hot last weekend.
On my own car i had a piece of tar stuck between the gears which had come loose because of the heat.
Maybe this also happened on jilles car, but he just went full throtlle in first gear on the back straight.
Every one waited when the engine gonna blow up.
But he was lucky that the track isn't really fast, second place driver could really come close on the straight but jilles was faster in the corners, and the guy who came in second had some bad luck in the pits during refuelling.

rmdhawaii 04-18-2007 12:18 PM

Thanks for the info. The race must have been really fun to watch. Jilles is one amazing guy. Looks like the NT1 is helping him reach his full potential as an on-road nitro racer. :nod:

rmdhawaii 04-18-2007 02:12 PM

Who from Team XRAY is participating in the Mugen Grand Prix in Las Vegas this week?

RC America 04-18-2007 02:21 PM


Originally Posted by rmdhawaii
Who from Team XRAY is participating in the Mugen Grand Prix in Las Vegas this week?

Barry Baker will be the only Xray driver attending the Mugen race.


Ralph Burch

rmdhawaii 04-18-2007 02:47 PM


Originally Posted by RC America
Barry Baker will be the only Xray driver attending the Mugen race.

Ralph Burch

Only Barry?!! Darn! I was hoping that you and Paul would be going as well - make it another 1-2-3 win. ;)

Should be interesting to see how things go with the West Coast crowd. :nod:

Pro Models 04-18-2007 03:01 PM

Guys quick question re what rims the nt1 uses, are the serpent rims a direct fit or is the nt1 rim slightly different offset etc..

RC America 04-18-2007 03:18 PM


Originally Posted by Pro Models
Guys quick question re what rims the nt1 uses, are the serpent rims a direct fit or is the nt1 rim slightly different offset etc..

The 0 offset Jaco rims fits, which is the same as the Serpent.


Ralph

CIMRI 04-19-2007 11:29 AM

Tires
 
Ralph,

What for a tire split do you run usually? Martin told me ;he is running harder tires at the rear. For more steering. Did you do this too?
I now that, s 720 drivers do this too, because they have to much rear tire wear and for better tire wear balance (front & rear)they have to do this.
Is this the same reason by NT1?

thnx
Christian


All times are GMT -7. It is currently 04:40 PM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.