Great thanks!

How are y'all seeing this video!!

That video sucks, it's way too blurry

You need to select a higher quality video if it's too blury for you. I didn't shoot the video, but it is very high quality and if your not able to see it there is no reason to say it sucks.

Maybe your connection is not very good. Click on the gear icon on the lower right hand side of the video player and you can select 720p HD if you want.

Maiden voyage tonight at ohio rc factory!!

I got it, it doesn't suck no more

How can I find vid on youtube???

Lol! :lol:

i had a old losi starter box clone, used that to get the motor going, with a heat gun of course. Happy to say I have a great time today running the buggy, lots of steering and handles great. Many came around the pit table to have a look after the main. Did not place due to transponder issues but did not care, was having to much fun!

Ran for the first time tonight at ohio rc factory, super tacky and high bite. The stock setup was way off for this traction. I can see the stock setup being amazing on outdoor loose blown out conditions. Made some few changes ie. stiffer rear oil, moved front and rear camber links a bit and limited droop. Car felt much better. There is going to be some more changes I'm going to make to suit my home track and driving style, such as use my trusty fioroni pistons (mostly because I'm used to them and can tune them in well), a stiffer front spring, mess with some oils and shock locations, take the 4 washers out of the steering stops and either run 2 or none. Need to drive it a few more times but the car is excellent and responds to changes very well (Tekno standard ;)...) pretty excited about getting her dialed in!!! Excellent job once again!!

It did not. Came off again during practice yesterday. I can see no way to "fix" this as I can't get inside the tank. Ideas?

Can u remove the nipple and just run a thicker fuel line through the hole. That is what I did when I was running my D8 and currenlty my 6T. Fuel line seals the hole and I have not had any leaks or issues with it.

Removing the nipple and going straight through with fuel line is probably the best way to handle this at the moment.

We are working with our manufacturers on a solution, but it might be a couple weeks before we figure out the exact cause. My thoughts are that they cut the internal fuel line a little short and it is able to move off of the nipple. We'll post more info as it becomes available. Thanks.

I got to see one of these cars in person last night. What a piece of art. The car looks amazing. The radio trey is a thing of beauty. I was very impressed. Good job Tekno. Hopefully they drive as well as they look!

Thanks!