Tekno kits build as good as any out there.

If everyone send these guys emails asking them to make us a nitro body I'm sure they will. So, please take time and shoot them an email....

http://shop.leadfingerrc.com/contactus.sc

Done!

+2

where a good starting point for the diffs on a rough med to loose track. box set up seems kinda high.

Looking at picking one of these buggies up, what additional parts spares/hopups should I be looking getting??

Its darn good out of the box. Must have a aluminum steering servo horn.

Nice to haves LRC brace, locking spring perches, new shock boots, Delrin shock cartridge. 6x1.5 pistons.

Spares that's a tough one. some shock shafts, pair of caster blocks, hinge pins inner, front arms, wing mount. Its a tough buggy.

Yeah at first I though like you... But keep coming back to 7-7-5.... if its really loose or bumpy stay with that diffs and add the overdrive setup in the back... it really help the car

That's perfect. Thank you for the info.

For those of us who stripped lower brace 3x40mm screw I recommend High Strength Socket Head cap "Protek PN# PTK-H-1214". http://www.amain.com/search?cID=&s=PTK-H-1214 Front brace screws don't interfere with bumper at all. Worth the upgrade at fairly cheap price.

Looks great! Good luck over there. Have some customers over there. Darrin Francis.

Darrin and kyle awesome people.

I was able to run mine this weekend for the 1st time. I had a blast. Took the 3 qualifiers to get my motor tune, and brakes all lined out. However, for the main the car was great.

I need to get used to running nitro again as I was blowing lines in nitro and caused me to lift too soon in electric.

what is your thoughts on servos ? I was thinking the Protek 150t for steerring and the 150s for throttle any thoughts ?