Thank you, thanks for the kind words! And good luck you wont be disappointed:)

Looks good!

Yes, it's possible and it's something we're considering. Probably wouldn't be for a while if we did though. A few other projects are first. Thanks for the suggestion.

which way is the motor setup? (forward or back)

Thanks for sharing, Matt. I'd love to see an after video with changes you made if you get the chance. Thanks again :-).

You dont need to make an entire box. Just take a look at how Losi does the
convertable Buggy/Truggy top for there box and then make a top like that for
the OFNA truggy box that was linked to in the post above. Those are by far
the most powerful and reliable boxes on the market.

A convertable Buggy/Truggy top like this
http://www.amainhobbies.com/images/m...r/tlr99059.jpg

Made for this box
http://www.amainhobbies.com/images/m...n/ofn10244.jpg

That's a good idea. We'll look in to it. Thanks.

The day has come to test this baby on the track. It's fine I am excited and can't sleep :lol:

Will be taking the eb48.2 as well for a testing session as I just stepped out of the eb48 .1 :p

Can't wait to hit the jumps woohoo finally thank you weather gods :sneaky:

Tekno, could you be specific on which air filters I should buy? I want to grab some pre oiled lucky 7 filters but don't know which models to get...........on a side note I hope a tekno pit mat and hauler bag is on the project list ;)

Grab the low-profile hobao oval filters, they work.

http://m.youtube.com/watch?feature=y...e_gdata_player

Oh yeh these things are great very easy to drive awesome grip and perfect steering.

Did not take much to get used to it at all

Great work guys

Nice drivin'.. Picco 5TR? (pipe?)

Yes mate 2099 combo pipe etc.


Hey Danny when will you guys have air filter in stock ?

Or do you have a part number for those hobao filters as I can't see any low profile filters :lol:

Motor was forward.


"Thanks for sharing, Matt. I'd love to see an after video with changes you made if you get the chance. Thanks again :-)."


never got a chance to get video during quals but the car was really good. I let several people drive it and the setup on the car seemed to fit everybody that drove it.

Done. Track opens in 2 hours.

Great video thanks for sharing! Looking great!

Looks ready! Report back with a report.

Did you run stock set up?

Yes that is the book set up and was real good :nod: :nod: :nod:

Had a ball can't wait to get another run in with it.

Where's the videos from Chula Vista at Danny!

I'm not sure who has them or if any were taken. I know we have pics. We swept eBuggy, 1 & 2 in SC 4x4, 1 & 2 in nitro truggy, TQ'd open nitro buggy, and qualified 4th in the expert buggy main. Had engine issues in the buggy mains, but the buggies were awesome all day.

All good. Drew a bit of a crowd actually as a lot of the nitro crowd was out. Beautiful day down here. Box setup may be a little loose for our track, but it could also be the awesome O.S. motor. I'm still learning. :nod:

One problem I had was the fuel uptake line and filter came off the nipple in the tank. I flat landed a big single a couple of times, and caught the pipe more than once, but no major wrecks. I managed to get some needle nose pliers in there and it went back on very easily... not a lot of bite if you know what I mean. It may have been loose to begin with. Don't know what to think of this yet. It didn't happen again.

Thanks for the feedback. The fuel line coming loose from the nipple in the tank is interesting. We haven't experienced that yet but I could see how it could happen if it was loose from the factory. Hopefully it stays put.

One thing we did this weekend was to go to 3.0 degrees of toe and move the hubs all the way forward. This helped a lot. Then we tried swapping the sway bars so that the front was 2.6mm and the rear was 2.5mm. You could even go higher on the front to further smooth out the car. Our cars have a ton of steering and it is sometimes necessary to limit it.

The other major thing we did, and it's different for everyone, was limit our dual rate / steering travel on the radio so the wheels don't turn as far. Alternatively, you could add another washer or two to the steering stops. Now that I have the steering travel where I want it, I will probably set it solely with the steering stops (not limited on the radio).

Are you still running the motor in the forward position?

Yes. We've run rear position on a number of occasions but always seem to come back to forward position. The car was designed to have the forward position be the stock position.

We will probably spend some time to get a rear motor setup, but we feel the forward motor will yield better results in almost every condition.

After letting several drivers drive the Tekno Buggy today I can tell you the setup on this car seemed to be good for everybody driven it. Here is the links for three of the people driven the car.

https://www.youtube.com/watch?v=EooO...e_gdata_player


https://www.youtube.com/watch?v=OIju...e_gdata_player


https://www.youtube.com/watch?v=pefh...e_gdata_player

Looks awesome!

Very cool thanks for sharing, that track looks rough:eek: Handled it well!

dam that look like a sweet ride

Thanks for posting. I hope everyone had fun driving the buggy. It looks really good out there :-). Let us know if you have any feedback and we can recommend some changes if applicable. Thanks again.

Is that track as rough as it looks in the videos or is that just the lighting?

http://s27.postimg.org/55pvlc0nn/CYM...216_155900.jpg





yes sir it was rough

Found a video of the NB48 in action this weekend

Chad Panek and Mat Dubb are both in this race

+ YouTube Video

Wow! NB48 looks even better knowing that!

great video. thanks

Great thanks!

How are y'all seeing this video!!

That video sucks, it's way too blurry

You need to select a higher quality video if it's too blury for you. I didn't shoot the video, but it is very high quality and if your not able to see it there is no reason to say it sucks.

Maybe your connection is not very good. Click on the gear icon on the lower right hand side of the video player and you can select 720p HD if you want.

Maiden voyage tonight at ohio rc factory!!