Class- 2wd Open
Date-4/30/2022
Location-Kenosha, WI
Race Time-294.4
Fastest Lap-3.38
Chassis- GLR-GT, Reflex 505 Brass chassis
Body-GL Ferrari 488 GT3
Wheelbase-98mm
Tires- PN KS-M Medium, Marka V1R05 rears
Motor- GL 3500vk
Batteries- Fantom 360mah lipo
Gearing- 64p 10/53 Ball diff

This was a pretty bad run. Was able to get the car to be much faster but just couldn’t stitch clean runs, a couple 6 sec + laps in here…

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Only 7 racers posting in 7 classes this month. Open 2WD had the most entries, with a tie for third place!

Box Stock
1st - Traveler - 265.1/3.35s
2nd - TAMAK - 278.0/3.33s
3rd - PoorBoy - 295.0/3.63s

Narrow 90mm
1st - Traveler - 267.6/3.36s

Porsche Cup
1st - Traveler - 271.0/3.44s

Stock Class
1st - Traveler - 244.0/3.09s
2nd - MiniZPlauen - 291.0/3.28s
3rd - PoorBoy - 295.2/3.33s

Pro Stock
1st - Traveler - 246.0/3.11s

Open 2WD
1st - ChamDas 236.8/2.82s
2nd - PoorBoy 290.4/3.50s
3rd - TAMAK - 294.4/3.38s
3rd - KDas - 294.4/3.22s
4th - PaulBarsamian - 337.7/3.79s

Open 4WD
1st - PoorBoy - 288.9/3.40s
2nd - PaulBarsamian 309.1/3.50s

FTM goes to ChamDas in his Open 2wd car with a smoking 2.82 fast lap!

Please check my tabulations and let me know if I made any mistakes or missed anyone.

Cheers,
Traveler2

We are keeping the April layout, but running counterclockwise for May.

Drive fast!

Class: Stock

Date: 15.04.2022

Location: Germany Plauen

Chassis: PN

Body: Jomurema

WB: 98mm

Tires: PN SS F and R

Motor, ESC: Atomic 3500KV, GL

Gearing: 53/10

Diff: Geardiff

Batteries: Orion Sho750

Front-Spring: Magnets

T-Plate: PN Carbon 4

Motormount: PN V5 modified

Damper: friction damper with 1 disc down 20.000 cst silicone oil green spring

fastes 3,281
average 3,887
race time 04:51 pictures at FB

Greetings Christian

Looks like the track shipped today, so hopefully I'll be sharing some times for May albeit not competitive times. There's not a lot of space here so I will have to set up/tear down the track between runs.

What do others with limited space who are unable to keep the track up do between sessions?

While catching up on the thread I noticed it die down in the past few months but with times still being posted I was afraid the conversation had moved over to Facebook. I don't have a Facebook account.
​​​​​​

Keep it that way and just post here. When Zuckerbook takes a tumble, the forum will still be here.

I take mine down almost every day. I just keep it in as big of pieces as I possible. Fast and easy to take it apart and put it back together (I leave the side rails on).

Be sure to vacuum your track and clean it. It take a few months of driving on it and cleaning it for the traction to get good.

Sounds simple enough. Thanks!

Man this is going to be a BIG CHALLENGE for me! Counter clockwise ALWAYS kills my times. I'm usually a few seconds slower going "backwards"!
It was a Crazy Month for me, and while I drove A LOT of laps, easily 10 hours overall, I was trying for clean laps more than the fastest. My fastest lap was 5 seconds flat, but I tend to push to hard when timing so most laps weren't timed.
I was able to use a small tripod to hold my phone to put it on a good angle for the camera to catch each lap using Laptrax on a Galaxy S9, and it caught every lap with the stock white Jomurema body. I am going to try the tripod with an Ipad mini as I like the LapTracker app's displays better than Laptrax on Andriod.
I'm still having a BLAST with this challenging track and scale of car! Hopefully the local HobbyTown will hold a race on their large track, as I think it would be awesome to open the throttle up!!!
Take Care and Drive Hard!!!
Drew

I got a bit of time today to set the track up and take a few runs. Boy there's some repetition and practice that's needed but I had a blast. Y'all sure do make it look easy.

I assumed the track this month is the smooth side? Neither the April or May track post mentions which side but I was too excited to ask and wait.

Glad you are having fun! Keep practicing!

Yes, smooth side every month. Doubt we’ll go back to rough side, but adequate advance notice will be provided if we do.

Finally got my lap counting system setup.

Does anyone know of any mini-z tracks in the Salt lake Utah area? Id like to see what my 1/64 scale mini-z-esque car can do on an rcp track.

There are some Mini-Z enthusiasts there they have the bigger RCP track. Not sure about the Mini-96. You might have better luck posting in the Kyosho Mini-Z Series thread which probably has a wider following.