1LikesElectric Touring / On-Road RC
04-27-2009, 08:16 PM
tanta: dadalhin ko yung sphere ko na naka-kabit sa b44 ... so may back up ka kung sakaling di palitan yung defective na sphere mo. 
pitshop ba bukas? game! sama ako diyan!
ano oras kayo?
joji: dalhin mo sa 8 men sa thursday ng gabi ... sa friday tuwid na tuwid at super stiff na! ... yung kit ha, hindi ikaw! wahahahaha
pitshop ba bukas? game! sama ako diyan!
ano oras kayo?joji: dalhin mo sa 8 men sa thursday ng gabi ... sa friday tuwid na tuwid at super stiff na! ... yung kit ha, hindi ikaw! wahahahaha
04-27-2009, 08:50 PM
Tech Regular
iTrader: (28)
tanta/ROBO: tama dalhin ko na lng sa 8men para maging stiff, sabay na din ako sino sino pa ba gusto magpa-stiff dyan??
sama ako pitshop what time?
sino sino pa ba gusto magpa-stiff dyan??sama ako pitshop what time?
04-27-2009, 10:43 PM
joji: mga 530 pa ako dun sa pitshop si weinner baka mas maaga daw kasi may ipapayos pa ... sori, pero malamang ikaw lang pupunta sa 8men ... kasi ikaw lang naman talaga mahilig dun!
04-28-2009, 12:04 AM
Tech Regular
iTrader: (28)
ROBO: cge punta din ako..
04-28-2009, 12:33 AM
04-28-2009, 01:30 AM
Suspended
gear ratio help
gud pm sirs
what's the pinion gear that will match a 61T spur gear
this is for my TT01,
got the car 2nd hand and the gear ratio is 55T/25T
I just use a silver can, and it can't accelerate fast enough
is 61T spur the stock spur of a TT01?
your help would be much appreciated
what's the pinion gear that will match a 61T spur gear
this is for my TT01,
got the car 2nd hand and the gear ratio is 55T/25T
I just use a silver can, and it can't accelerate fast enough
is 61T spur the stock spur of a TT01?
your help would be much appreciated
04-28-2009, 02:32 AM
cheech & chong: sori cant help as im not familiar with the tt01 internal ratio and the drive ratios used for silver can. maybe one of the tamiya racers can help ...
neil, axo, kiri, etc .... baka matulungan mo ang kapwa racer natin.
neil, axo, kiri, etc .... baka matulungan mo ang kapwa racer natin.
04-28-2009, 04:03 AM
cheech...
Yes the 61T is the stock spur gear of the TT01.
IF you want "acceleration" then a 19T pinion is your best bet with the 61T spur BUT you will lose top speed. You can match 19T-22T pinions with the 61T spur.
You can get a softcopy of the manual from the Tamiya USA website HERE
HTH
Yes the 61T is the stock spur gear of the TT01.
IF you want "acceleration" then a 19T pinion is your best bet with the 61T spur BUT you will lose top speed. You can match 19T-22T pinions with the 61T spur.
You can get a softcopy of the manual from the Tamiya USA website HERE
HTH
04-28-2009, 03:04 PM
hello, anybody here? when is the next race? may race results from 1rst race? salamat.
04-28-2009, 11:44 PM
04-29-2009, 12:05 AM
CALL: 722-6180
04-29-2009, 03:54 AM
mga pre, ilang turn ba pag BL ang ginagamit nyo?
04-29-2009, 04:50 AM
Suspended
cheech...
Yes the 61T is the stock spur gear of the TT01.
IF you want "acceleration" then a 19T pinion is your best bet with the 61T spur BUT you will lose top speed. You can match 19T-22T pinions with the 61T spur.
You can get a softcopy of the manual from the Tamiya USA website HERE
HTH
Yes the 61T is the stock spur gear of the TT01.
IF you want "acceleration" then a 19T pinion is your best bet with the 61T spur BUT you will lose top speed. You can match 19T-22T pinions with the 61T spur.
You can get a softcopy of the manual from the Tamiya USA website HERE
HTH
salamat po sa tips
thanks a lot sir neil4wd
BTW do you practice in JP?
I heard kasi na parang may membership or something dun.
if you are not refered by anyone you can't come in.
(that's what I heard)
and what if may mga kasama, same fees apply pa din po ba?
or yung may dala lang ng kit ang may fee.
want to try out out a real race track
04-29-2009, 07:39 AM
Results of Round 1
Stock Touring Class
1st Place – Alfonso Ramos
2nd Place – Jason Dela Cruz
3rd Place – Neil Severino
4th Place – Jomil Dela Cruz
M-Chassis Class
1st Place – Edwin Ambalada
2nd Place – Rey Parco
3rd Place – Edward Angtuaco
Formula 1 Class
1st Place – Takahashi
2nd Place – Edward Angtuaco
3rd Place – Raymund Aguilar
4th Place – Tutoy Aldaba
4WD GT Class
1st Place – Yuichiro Takaya
2nd Place – Tutoy Aldaba
3rd Place – Anton Ramos
4th Place – Christian Saplala
5th Place – Gian Sibayan
6th Place – Edward Angtuaco
7th Place – Norman Cruz
8th Place – Jygs Tiangco
Open Stock 23 Class
1st Place – Yuichiro Takaya
2nd Place – Josh Castro
3rd Place – Tutoy Aldaba
4th Place – Anton Ramos
5th Place – Jygs Tiangco
6th Place – Jason Dela Cruz
7th Place – Edwin Ambalada
Round 2 this Saturday May 2 @ JPRaceway.
Track opens at 9am, race starts at 2pm.
Same layout as Round 1, same direction.
Points tally to follow after Round 2.
04-29-2009, 04:43 PM
cheech...yep I go to JP.
No referrals or membership required, just a passion for RC. They open at 10am and stay open as long as there are racers on track. Tues to Sun. Closed on Mondays.
Track fees only apply to racers that use the track and it's good for the entire day even if you step out for a bite to eat. Drinks are available onsite but you will have to bring lunch or order delivery from any of the surrounding fastfood shops. Guests and family members are very much welcome...and if they get hooked to the hobby, so much the better.
Just drop on by and look for Ramil and he'll take care of you.
I think ROBORAT is organizing a practice-race for May 1. You're very welcome to join in or even just drop by and get to know the guys if you have time. Just keep checking this thread for details.
HTH
No referrals or membership required, just a passion for RC. They open at 10am and stay open as long as there are racers on track. Tues to Sun. Closed on Mondays.
Track fees only apply to racers that use the track and it's good for the entire day even if you step out for a bite to eat. Drinks are available onsite but you will have to bring lunch or order delivery from any of the surrounding fastfood shops. Guests and family members are very much welcome...and if they get hooked to the hobby, so much the better.
Just drop on by and look for Ramil and he'll take care of you.
I think ROBORAT is organizing a practice-race for May 1. You're very welcome to join in or even just drop by and get to know the guys if you have time. Just keep checking this thread for details.
HTH