Team Associated F1
#961
And is the servo mount fixed to the main chassis in the rear or floating?
#962
#964
Tech Apprentice
#965
And will the rear servo mount be fixed to the main chassis or not when using the long shock configuration?
#966
Tech Apprentice
Among some other things I'm a little fuzzy on, yes. And you could try either way, mounted to the chassis or floating, it just depends on what you like and what surface you're racing on. It's still a flex adjustment.
#967
I have a question for the users of the car.
What is the outer diameter of the lower suspension arm pivot ball???
Either in inch or metric but I need the precise measurement.
Thanx in advance!!
What is the outer diameter of the lower suspension arm pivot ball???
Either in inch or metric but I need the precise measurement.
Thanx in advance!!
#968
Tech Adept
new to f1 my car pulls to the left hard on power. runing on black carpet.
#969
Tech Master
iTrader: (70)
- Tweak in the car.
- Bearings
- Weight distribution - this shouldn't matter too much under hard acceleration unless it's a lot...
- Check your front kingpin springs, make sure they aren't very old - those little springs give up after some runs (especially after kissing the barriers).
#970
Tech Adept
Could anyone supply a part number/name for the circled parts, such that they could be bought seperately? Looking for the ball and cup that inserts into the carbon suspension arm. Thanks!
#972
Tech Prophet
iTrader: (9)
Join Date: Nov 2014
Location: Far south suburbs of Chicago area
Posts: 17,636
Trader Rating: 9 (100%+)
After 2 summers decided to make a esc change.
#975
Tech Adept
If it is going "straight" while going slow, like checking to make sure it goes straight, and only goes left under full throttle situations, check;
- Tweak in the car.
- Bearings
- Weight distribution - this shouldn't matter too much under hard acceleration unless it's a lot...
- Check your front kingpin springs, make sure they aren't very old - those little springs give up after some runs (especially after kissing the barriers).