NEW XRAY T2
#1517
Tech Champion
iTrader: (4)
Originally Posted by Ill Factor
Sorry if this sounds dumb but what is RW Racing and where can I find them?
What size 64p spur should asphalt guys use?
What size 64p spur should asphalt guys use?
RW gears are imported by Schumacher USA and are stocked by most serious race hobby shops.
The FK 05' and T2 use gears in the 114-118T range. 116T seems to be the most popular.
If your local shop doesn't have them you can get them from Schumacher direct:
http://www.racing-cars.com/usa/searc...rtname2=partno
#1518
Got in trouble-------
Steve W:::I can only guess--- They got more kits than we did and that's not fair!
On the other hand I probably don't need to see any more pic's until it is the one on the box in my hands. Which brings up another humorous thought.
The C & W song about wife leaving if he goes fishing again-----
Wellllllllllllllllll I'm gona miss her----------cause I ordered it anyway.
By the way Steve -- I for one hope your fingers are very tired right now from addressing shipping labels! Namely mine
and yes I will keep my day job because I stink at comedy.
Darrald
On the other hand I probably don't need to see any more pic's until it is the one on the box in my hands. Which brings up another humorous thought.
The C & W song about wife leaving if he goes fishing again-----
Wellllllllllllllllll I'm gona miss her----------cause I ordered it anyway.
By the way Steve -- I for one hope your fingers are very tired right now from addressing shipping labels! Namely mine
and yes I will keep my day job because I stink at comedy.
Darrald
#1519
OK Stormer got theres. What about Speed Tech? Keep us updated Steve, we all want to know wazuuup.
#1520
shocks are not the same......close, but no cigar
I am sure I will be able to sell the kit for close to what I paid, dont care if I lose a few bucks, will mean I can race this weekend, and also will have some extra hubs and knuckles just in case!
I am sure I will be able to sell the kit for close to what I paid, dont care if I lose a few bucks, will mean I can race this weekend, and also will have some extra hubs and knuckles just in case!
#1521
At least for stock and 19t motors, I've been able to confirm that you can use 64p spur sizes all the way down to 108t (in conjunction with 23t+ pinion). This would equal rollout numbers in the neighborhood of 23.0mm+.
#1522
Will the PRP gears work without mod in the T2?
Man....I would hope so!
Britracer....having any other issues with the new car. Where the upper deck conects to the bulkheads, is that a weak spot for bending and tweak?
I should have mine soon. Can't wait!
Britracer....having any other issues with the new car. Where the upper deck conects to the bulkheads, is that a weak spot for bending and tweak?
I should have mine soon. Can't wait!
#1523
Originally Posted by Ill Factor
OK Stormer got theres. What about Speed Tech? Keep us updated Steve, we all want to know wazuuup.
Steve Wang
#1524
Originally Posted by drsfly
Steve W:::I can only guess--- They got more kits than we did and that's not fair!
On the other hand I probably don't need to see any more pic's until it is the one on the box in my hands. Which brings up another humorous thought.
The C & W song about wife leaving if he goes fishing again-----
Wellllllllllllllllll I'm gona miss her----------cause I ordered it anyway.
By the way Steve -- I for one hope your fingers are very tired right now from addressing shipping labels! Namely mine
and yes I will keep my day job because I stink at comedy.
Darrald
On the other hand I probably don't need to see any more pic's until it is the one on the box in my hands. Which brings up another humorous thought.
The C & W song about wife leaving if he goes fishing again-----
Wellllllllllllllllll I'm gona miss her----------cause I ordered it anyway.
By the way Steve -- I for one hope your fingers are very tired right now from addressing shipping labels! Namely mine
and yes I will keep my day job because I stink at comedy.
Darrald
You're exactly right, and unfortunately we have to respect that RC America have to be fair to everyone. However, we are still short on kits unfortunately at the moment no extras
Steve Wang
#1525
Tech Champion
My LHS just got 6 in today. $20 less than the '05 was too! Very nice looking car.
#1526
Originally Posted by SpeedTech
They are in stock The guys in the back are rolling up their sleeves and getting them on their way. ALL car kits will be shipped today we started preparing for this over the weekend. Check your email box for confirmation tracking number emails tonight
Steve Wang
Steve Wang
Friggin Awesome. Steve Wang in 08. LOL
#1528
Tech Elite
iTrader: (8)
For the guys that have PM'd with questions on this site, please just email us. I've had several of the PM's come back with this error.
"... (insert name) has chosen not to receive private messages or may not be allowed to receive private messages. Therefore you may not send your message to him/her..."
Use this.
[email protected]
Thanks for your time.
-Bob
"... (insert name) has chosen not to receive private messages or may not be allowed to receive private messages. Therefore you may not send your message to him/her..."
Use this.
[email protected]
Thanks for your time.
-Bob
Last edited by Bob-Stormer; 01-10-2006 at 03:07 PM.
#1529
Tech Master
iTrader: (59)
Originally Posted by teamgp
At least for stock and 19t motors, I've been able to confirm that you can use 64p spur sizes all the way down to 108t (in conjunction with 23t+ pinion). This would equal rollout numbers in the neighborhood of 23.0mm+.
I don't know how much of this forum has been read, but the shock bodies are definitely different, they are shorter and the threads for the preload spacers do not go all the way up to the collar in which the shock nut sits on.