World GT-R Rules and Discussion
#511
Tech Master
iTrader: (41)
I've been using the Delta Plastics Panoz on my Top Rebel and like the forward bite but have been tempted to try the Caddy as the Panoz is a heavy body but great for durability, the guys at the track say it looks like the bat mobile so I'm tempted to paint another one up in that scheme.
#513
Tech Champion
iTrader: (17)
#515
Tech Master
iTrader: (41)
Been on my tires for 3 months. They still look good and seem to run as well as when new. Don't have any other WGT-R cars to run with so I race with the guys in USGT. They thump me but I am driving flat out. That is a good thing. This is going to help for gas season.
Last edited by davidl; 03-20-2016 at 03:35 PM.
#516
Tech Master
iTrader: (1)
Class is doing reasonably well at "The Gate". Way more cars running it than used to run WGT so that is a plus. Tires last and save you big bucks and time (no truing). It is a real driving class and well thought out by CRC. Some people have to get over the foam addiction though. Same thing happened in TC.
#517
#519
Tech Champion
iTrader: (4)
Well I finally got to try the WGT-R car on Asphalt yesterday. I left the car as I normally run it on carpet. Probably with one softer center spring the car ran great ! My other buddy ran his and his also worked fine.
As for the other motors the 21.5 would be really slow and a 13.5?. the one thing I don't like is the car will get stuck on the pipes and you can't get it off like I car with my 17.5 car. As for my foam addition Both class I race are very competitive and extemely close (WGT-R and GT 17.5 (foam)).
As for the other motors the 21.5 would be really slow and a 13.5?. the one thing I don't like is the car will get stuck on the pipes and you can't get it off like I car with my 17.5 car. As for my foam addition Both class I race are very competitive and extemely close (WGT-R and GT 17.5 (foam)).
#520
Tech Addict
iTrader: (5)
Well I finally got to try the WGT-R car on Asphalt yesterday. I left the car as I normally run it on carpet. Probably with one softer center spring the car ran great ! My other buddy ran his and his also worked fine.
As for the other motors the 21.5 would be really slow and a 13.5?. the one thing I don't like is the car will get stuck on the pipes and you can't get it off like I car with my 17.5 car. As for my foam addition Both class I race are very competitive and extemely close (WGT-R and GT 17.5 (foam)).
As for the other motors the 21.5 would be really slow and a 13.5?. the one thing I don't like is the car will get stuck on the pipes and you can't get it off like I car with my 17.5 car. As for my foam addition Both class I race are very competitive and extemely close (WGT-R and GT 17.5 (foam)).
Mark
#523
Tech Elite
iTrader: (28)
We had a full heat with 9 entries. In the main, the leader and myself were locked nose to tail the whole race but I just didn't have the HP to make a clean pass so I just stayed close, hoping for a mistake. He ran a clean race and I had to settle for second having come really close to pushing past a few times. I consider myself a clean racer and wasn't going to win by ruining his race.
I am definitely hooked!
I will test a 13.5t the next time out for the fun of it.
#524
Terrible steering on Carpet
Need help with heavy push steering issue on medium/high bite carpet.
Running X10'15 1s 13.5, 1 degree camber in/.5 degree toe out/2.5 degree reactive caster/stock front width/stock position caster clips/stock knuckle shims/associate green side springs/stock Gold center spring with 500wt shock fluid/black 2.5 front Springs. Running 5mm ride height for crc tires front middle and rear of chassis and 1s lipo at front position. 6 min sauce on full tire front and rear.
Even though I'm running rubber tires on groomed carpet, there should be tons of steering and it's not there. Willing to make any changes to fix the problem.
Thanks!
Running X10'15 1s 13.5, 1 degree camber in/.5 degree toe out/2.5 degree reactive caster/stock front width/stock position caster clips/stock knuckle shims/associate green side springs/stock Gold center spring with 500wt shock fluid/black 2.5 front Springs. Running 5mm ride height for crc tires front middle and rear of chassis and 1s lipo at front position. 6 min sauce on full tire front and rear.
Even though I'm running rubber tires on groomed carpet, there should be tons of steering and it's not there. Willing to make any changes to fix the problem.
Thanks!
#525
Tech Champion
iTrader: (4)
Your right as I did not see the 2's. why do you want to change the class as it was set-up. It is hard enough to get racers first of all. then there is trying to get them to run rubber instead of foam. It's overall cheaper but the intinal expense is greater. We run both here is sunny Florida. We have way more guys running foam over rubber. Hopefully what we are working on will change that in the next few months.
as I said earlier both classes are extremely competitive and one mistake can cost you a position quickly. These classes are way more fun than anything else I've been racing in years- 17.5,one cell !!!
as I said earlier both classes are extremely competitive and one mistake can cost you a position quickly. These classes are way more fun than anything else I've been racing in years- 17.5,one cell !!!